User manual WHIRLPOOL AWOE SM9212 PRODUCT FICHE

[. . . ] If you want to avoid completely noise of to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly. Do not use softener. 3. 0 Saving programme with a very low water consumption. Use liquid detergent and the lowest cotton, artificial fibres 3. 0 Briefly worn clothing made of recommended detergent and blends with cotton. Use lowest amount. Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments. 3. 5 Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent detergent and pollen residues. [. . . ] 8. 0 Rinseas theintensive and the final spin in the “Cotton” programme. Same last rinse — ❉: 1) optional / Yes : dosing required For improved garment care, spin speed is restricted in this programme. The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702 Whirlpool is a registered trademark of Whirlpool USA 5019 301 06489 30106489GB. fm Page 2 Friday, May 20, 2011 5:38 PM CONSUMPTION DATA Programme Mixed Cotton Cotton* Cotton* Cotton Cotton* Synthetics Synthetics Delicates Wool/Handwash White Light colours Dark Super Silent AquaEco Speed 15 Bedlinen Big Items Temperature (°C) 40 95 60 60 40 40 60 40 30 40 40 40 40 60 40 30 60 40 Load (kg) 6. 0 8. 0 8. 0 4. 0 8. 0 4. 0 3. 5 3. 5 2. 5 2. 0 8. 0 5. 5 5. 0 8. 0 3. 0 3. 0 3. 5 3. 0 Water (l) 67 82** 59 42 78 42 48** 45 60 49 77 70 45 75 19 30 60 74 Energy (kWh) 0. 58 2. 40 0. 98 0. 78 0. 85 0. 63 0. 95 0. 53 0. 40 0. 63 0. 80 0. 50 0. 50 0. 95 0. 45 0. 20 1:30 0. 75 Approx. Programme Duration (hours : minutes) without “Rapid” with “Rapid” 1:00 — 2:20 — 4:00 2:20 3:10 *** 3:15 2:05 3:00 *** 1:55 1:14 1:40 0:59 0:45 — 0:40 — 2:20 — 1:20 — 1:40 1:15 4:00 — 1:00 — 0:15 — 2:00 — 1:30 — - - To terminate the “Rinse hold” by draining the water, without any spinning, press the “Start (Pause)” button . To terminate the programme by spinning the laundry, press the “Spin speed” button to select the desired spin speed and then the “Start (Pause)” button to start the spin cycle. Do not leave the laundry to soak in the rinse hold for too long. • Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. SAVE YOUR FAVOURITE PROGRAMMES If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button. • Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at briefly blinks least 3 seconds. The “Favourites” indication and then lights up - the programme setting is saved. Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing “Start (Pause)” . If you want to replace the saved programme setting by another one, proceed as already described above. START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”. “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. “Rinse hold” ) • Every programme has a predefined spin speed. • If you select spin speed “0”, the final spinning is cancelled, and the water is drained out only. • If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. - Select “Rinse hold” if you want to postpone spinning to a later time or if you want to drain only. - The programme stops to “Rinse hold” when the “Rinse hold” light in the programme sequence indicator is on. The “Start (Pause)” button light blinks. PROGRAMME END • 1. The display shows “End” and the “Door open” indication lights. The light stops Open the tap and press “Start (Pause)” blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. [. . . ] Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Select the new programme, temperature, any options and another spin speed if you want. The light is on, and the programme continues at the same position where the previous programme was interrupted. [. . . ]