User manual WHIRLPOOL DBRI 5810/02 IN INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL DBRI 5810/02 IN. We hope that this WHIRLPOOL DBRI 5810/02 IN user guide will be useful to you.


WHIRLPOOL DBRI 5810/02 IN INSTRUCTION FOR USE: Download the complete user guide (836 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL DBRI 5810/02 IN MODE D'EMPLOI (838 ko)
   WHIRLPOOL DBRI 5810/02 IN GEBRUIKSAANWIJZING (838 ko)
   WHIRLPOOL DBRI 5810/02 IN BEDIENUNGSANLEITUNG (838 ko)
   WHIRLPOOL DBRI 5810/02 IN INSTRUZIONI PER L'USO (830 ko)
   WHIRLPOOL DBRI 5810/02 IN LIBRO DE INSTRUCCIONES (837 ko)

Manual abstract: user guide WHIRLPOOL DBRI 5810/02 ININSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • Do not touch the appliance with any wet part of the body and do not operate it when barefoot. • The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety. • Customer care: do not repair or replace any parts of the appliance, unless specifically recommended by the manual. All other maintenance operations must be carried out by a qualified technician. [. . . ] The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic equipment. GB12 501941833313:Layout 1 25-02-2009 8:51 Pagina 13 TROUBLESHOOTING GUIDE The appliance does not work: • Check for the presence of mains electrical power and if the appliance is connected to the electrical supply. • Turn off the appliance and restart it to see if the fault persists. The hood's suction level is not sufficient: • Check the suction speed and adjust as necessary: • Check that the filters are clean: • Check the air vents for any obstructions; The light does not work; • Check the light bulb and replace if necessary; • Check that the light bulb has been correctly fitted; AFTER-SALES SERVICE Before calling the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the "Troubleshooting guide". Switch the appliance off and back on again it to see if the fault persists. If after the above checks the fault still occurs, get in touch with the nearest After-sales Service. Always specify: • a brief description of the fault; • the exact type and model of the appliance; • the service number (number after the word Service on the rating plate), located on the inside of the appliance. The service number is also indicated on the guarantee booklet; • your full address; • your telephone number. If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used and repairs carried out correctly). CLEANING WARNING: Never use steam cleaning equipment. Disconnect the appliance from the power supply. IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth. IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. • Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. GB13 501941833313:Layout 1 25-02-2009 8:51 Pagina 14 MAINTENANCE WARNING: Use safety gloves. Disconnect the appliance from the power supply. GREASE FILTERS The metal grease filter has unlimited duration. It should be washed at least once a month, either by hand, or by placing it in the dishwasher (use a short cycle and low temperature). If washed in the dishwasher, the grease filter surface may become matt. After the filter has been washed and dried, replace following the inverse procedure. REPLACING THE ALOGEN LAMPS WARNING: - Only use 20W MAX - G4 halogen lamps. 1. Insert the blade of a small flat screwdriver where indicated by the three points, and with a gentle pressure lift the cover from its position. Replace the cover (spring lock). ACTIVE CARBON FILTER (filter models only): The carbon filter must be washed once a month in the dishwasher at the highest possible temperature using a standard dishwasher detergent. [. . . ] Secure with two screws (some models only), from the inside of the hood. Fit the two 2 cover plates (supplied, and recognisable from the hooks). The wider, deeper, cover plates are for the upper chimney, and must be cut to size. GB16 501941833313:Layout 1 25-02-2009 8:51 Pagina 17 Refit the carbon filter holding frame, the grease filter and the perimeter suction panel. Connect the hood to the electric power supply and wait for the electronic control unit to perform the calibration procedure. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL DBRI 5810/02 IN




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL DBRI 5810/02 IN will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.