User manual WHIRLPOOL UXT5230BDS USE & CARE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT5230BDS. We hope that this WHIRLPOOL UXT5230BDS user guide will be useful to you.


WHIRLPOOL UXT5230BDS USE & CARE GUIDE: Download the complete user guide (5232 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT5230BDS WARRANTY INFORMATION (107 ko)
   WHIRLPOOL UXT5230BDS DIMENSION GUIDE (74 ko)
   WHIRLPOOL UXT5230BDS WARRANTY INFORMATION (107 ko)

Manual abstract: user guide WHIRLPOOL UXT5230BDSUSE & CARE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. Com In Canada, for assistance, installation and service, call 1-800-807-6777 or visit our website at www. RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. [. . . ] Position the edge of the plate with the widest distance (A) between the hole and edge of the mounting plate against the wall. Position the side edges of the mounting plate between the dots marked previously. IMPORTANT: The widest edge (A) of the vent mounting plate must be positioned against the wall. - D D ■ Hold the range hood firmly in place with one hand and bend each mounting tab (A) upward approximately 90°. For a top vented installation: Mark the 4 vent hole locations (C) on the top of the range hood. For a rear vented installation: Mark the 4 vent hole locations (D) on the rear of the range hood. 4 cm) Rectangular Vent System Using a 1¹⁄₄" (3 cm) drill bit, drill the hole in the dot marked previously at the electrical strain relief. OPTIONAL: If you prefer, bend the rear tabs against the rear of the range hood and attach to the wall using #8-18 x ⁵⁄₈" (4. Option 2 - Power Cord Kit Installations For optional power cord kit installations, follow the instructions supplied with the power cord kit. See the “Assistance or Service” section for information on ordering. NOTE: Use only with range hood cord connection kits that have been investigated and found acceptable for use with this model range hood. Connect Vent System ■ ■ ■ Connect the ventwork to the range hood. Seal joints with vent clamps or duct tape to make secure and airtight. Make Electrical Connection A B C ■ Replace the 2 bottom panels. Position the panel with the small tabs toward the front of the range hood and the wide flange toward the center of the range hood. Place the back of the panel into the rear channel and push the panel toward the back of the range range hood until the tabs on the front of the panel clear the front mounting flange. - Slide the panel toward the outside edge of the range hood and push the front of the panel up until the panel tabs align with the slots in the front. - Option 1 - Direct Wire Installations ■ ■ Use a UL Listed/CSA Approved wire connector and connect the 2 white wires (A) together. Use a UL Listed/CSA Approved wire connector and connect the 2 black wires (B) together. If the range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section. – Connect the green (or bare) ground wire (C) from the power supply to the green ground screw in the electrical box and tighten the screw securely. [. . . ] Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Whirlpool servicer is not available. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT5230BDS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT5230BDS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.