User manual WHIRLPOOL WA PRIMELINE 24TDI PROGRAM CHART

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WA PRIMELINE 24TDI. We hope that this WHIRLPOOL WA PRIMELINE 24TDI user guide will be useful to you.


WHIRLPOOL WA PRIMELINE 24TDI PROGRAM CHART: Download the complete user guide (230 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WA PRIMELINE 24TDI MODE D'EMPLOI (752 ko)
   WHIRLPOOL WA PRIMELINE 24TDI KURZANLEITUNG (235 ko)
   WHIRLPOOL WA PRIMELINE 24TDI GEBRUIKSAANWIJZING (747 ko)
   WHIRLPOOL WA PRIMELINE 24TDI BEDIENUNGSANLEITUNG (748 ko)
   WHIRLPOOL WA PRIMELINE 24TDI INSTRUZIONI PER L'USO (751 ko)
   WHIRLPOOL WA PRIMELINE 24TDI INSTRUCTION FOR USE (763 ko)

Manual abstract: user guide WHIRLPOOL WA PRIMELINE 24TDIPROGRAM CHART

Detailed instructions for use are in the User's Guide.

[. . . ] 1000 1) — 20 - 60 °C Slightly to normally soiled textiles made of cotton and/or synthetics. Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets. Only woollens, labelled with the Woolmark and identified as machine washable. [. . . ] As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. RED INDICATIONS “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service. “Water tap closed” The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in your Instructions for Use. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The time indicated on the display can deviate from the values in the table, because it takes into account the household * conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** *** Reference Programme for Energy Label. START DELAY The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”. • Press the “Start Delay” button to select the delay time by 1 to 23 hours; • Press the “Start/Pause” button. The indication light over the “Start Delay” button starts blinking, and the countdown of the delay time begins. During the whole countdown, the light of the “Start Delay” button as well as the dot on the display keep blinking. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. • Once having pressed the “Start/Pause” button, the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced in steps of 10 minutes. To cancel the “Start Delay” . . before you press the “Start/Pause” button: • Turn the programme selector to another position or press the “Reset” button. . . after having pressed the “Start/Pause” button: • Press the “Reset” button for at least 3 seconds - the start delay time disappears from the display. ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. The display shows the programme duration in hours and minutes as well as the predefined temperature. [. . . ] “Intensive rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies. “Easy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. • Increases the water quantity and the clothes are spun very gently. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WA PRIMELINE 24TDI




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WA PRIMELINE 24TDI will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.