User manual WHIRLPOOL WED9290FC INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WED9290FC. We hope that this WHIRLPOOL WED9290FC user guide will be useful to you.


WHIRLPOOL WED9290FC INSTALLATION GUIDE: Download the complete user guide (9256 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WED9290FC USE & CARE GUIDE (5356 ko)
   WHIRLPOOL WED9290FC WARRANTY INFORMATION (154 ko)
   WHIRLPOOL WED9290FC DIMENSION GUIDE (374 ko)
   WHIRLPOOL WED9290FC USE & CARE GUIDE (5356 ko)
   WHIRLPOOL WED9290FC WARRANTY INFORMATION (154 ko)
   WHIRLPOOL WED9290FC QUICK REFERENCE SHEET (2688 ko)
   WHIRLPOOL WED9290FC VENTILATION SPECIFICATION (1518 ko)

Manual abstract: user guide WHIRLPOOL WED9290FCINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Com INSTALLATION NOTES Date of purchase:__________________________________ Date of installation:________________________________ Installer:_________________________________________ Model number:____________________________________ Serial number:____________________________________ NOTES CONCERNANT L’INSTALLATION Date d’achat :______________________________________ Date d’installation :_________________________________ Installateur :_______________________________________ Numéro de modèle :_________________________________ Numéro de série :___________________________________ W10777574B W10777575B - SP Dryer Safety Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel – Do not contact the thermostat bracket while the appliance is energized. 2 Installation Requirements TOOLS AND PARTS Gather the required tools and parts before starting installation. Parts supplied: Tools needed: Leveling legs (4) Flat-blade screwdriver #2 Phillips screwdriver 6' (1829 mm) drain hose with couplers Cable ties (2) Wire stripper (direct wire installations) Channel locks Parts package is located in dryer drum. [. . . ] nOTE: If local codes do not permit connection of a cabinet-ground conductor to neutral wire , go to “Optional External Ground 3-wire connection. € This connection may be used with either a power supply cord or a direct wire connection. Remove terminal block cover Using a wrench and tape measure, screw leveling legs into leg holes until bottom of foot is approximately 1/2" (13 mm) from bottom of dryer. Attach power supply cord to strain relief Put power supply cord through the strain relief. Be sure that the wire insulation on the power supply cord is inside the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. If your outlet looks like this: Power supply cord 4-wire receptacle (NEMA Type 14-30R): Go to “4-Wire Power Supply Cord Connection. € A B C D 4-Wire Power Supply Cord Connection IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. If your wiring looks like this: 4-wire direct connection: Go to “4-Wire Direct Wire Connection. Remove neutral ground wire (E) from green external ground conductor screw (A). € E C 4-Wire Direct Wire Connection IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit 3-wire connections. Prepare your 4-wire cable for direct connection 31 ⁄2" ) m (89 m 1" ) m (25 m Connect neutral ground wire (E) and place hooked end (hook facing right) of neutral wire (white or center wire) (C) of direct wire cable under center screw of terminal block (B). Strip 5" (127 mm) of outer covering from end of cable, leaving bare ground wire at 5" (127 mm). A F Connect ground wire (green or bare) (F) of direct wire cable under green external ground conductor screw (A). Connect neutral wire B C Place hooked ends of remaining direct wire cable wires under outer terminal block screws (hooks facing right). Finally, reinsert tab of terminal block cover into slot of dryer rear panel. € Place hooked end of neutral wire (white or center) (C) of direct wire cable under center terminal block screw (B), hook facing right. Prepare your 3-wire cable for direct connection 1" ) m (25 m 3½ (89 m " m) Direct wire cable must have 5 ft. If using 3-wire cable with ground wire, cut bare wire even with outer covering. Place hooked ends of remaining direct wire cable wires under outer terminal block screws (hooks facing right). Finally, reinsert tab of terminal block cover into slot of dryer rear panel. [. . . ] Remove door from dryer IMPORTANT: If the protective film has not yet been removed from the dryer, peel the film from the dryer door before proceeding. Using a Phillips screwdriver, reinstall the 10 screws securing the inner door to the outer door. Using a T25® screwdriver, remove the 4 screws securing the door hinge to the dryer and lift up and out to remove the door.  emove outer window assembly R from trim ring Using a T25® screwdriver, remove the 2 screws securing the door strike to the door frame of the dryer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WED9290FC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WED9290FC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.