User manual WHIRLPOOL WP 76 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WP 76. We hope that this WHIRLPOOL WP 76 user guide will be useful to you.


WHIRLPOOL WP 76 INSTRUCTION FOR USE: Download the complete user guide (79 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WP 76 CUADRO DE MANDOS (229 ko)
   WHIRLPOOL WP 76 SCHEDA PROGRAMMI (231 ko)
   WHIRLPOOL WP 76 PROGRAM CHART (227 ko)
   WHIRLPOOL WP 76 SCHEDA PROGRAMMI (231 ko)

Manual abstract: user guide WHIRLPOOL WP 76INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Detailed instructions are given in chapter 5 “What to do if. . . ”. Salt level indicator and rinse aid level indicator These indicator lamps light up when salt or rinse aid need to be added. Fault indication and wash time display In normal operation it indicates the remaining time (h:mm), whereas with “Delayed start” selected it indicates the time remaining until programme start (hh). In the presence of a fault indication “F. . ” –, see section “5. [. . . ] If the “Half load” option is selected, detergent dosage should be reduced by approximately 1/3. etc. ) Large Combined action detergents should be placed, according to the compartment A manufacturer's recommendations, in compartment A. Firmly close and press the detergent compartment lid shut after filling. button 1 Small compartment B Detergents with rinse aid incorporated may be effective only with longer programmes. In the case of shorter programmes, detergent residue may be a problem (if necessary, use powder detergent). The guarantee is not applicable if faults are caused by the use of these products. HOW TO CHECK/FILL/ADJUST RINSE AID Not necessary when using a combined action detergent. How to check the rinse aid level Check the visual indicator C on the rinse aid dispenser: dark = sufficient rinse aid, clear = add rinse aid. In the case of appliances with an electric indicator on the Indicator C control panel, the rinse aid indicator lamp lights up red when rinse aid needs to be added. How to fill the rinse aid dispenser max Open the rinse aid dispenser by pressing the right button (button 2) of the dispenser. Fill the dispenser with rinse aid up to the “max” line (approx. This prevents the formation of excess suds which can cause a fault function of the appliance. How to adjust the rinse aid dosage regulator The rinse aid dosage can be adjusted to the detergent used. Overview”), set the detergent dispenser system to the “no salt” setting so that the salt indicator lamp remains activated (“Detergent with rinse aid”). Packing The packaging materials are 100% recyclable and marked with the recycling symbol. Removing the packaging and inspecting the contents After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly. Before using the dishwasher for the first time - The appliance is designed to operate at ambient temperatures of between 5°C and 45°C. - This dishwasher has been tested by the manufacturer to ensure it functions correctly. Such testing may leave slight drips/ water marks which will disappear with the first wash. - Always fully load the dishwasher before running it or select the “Half load/Multizone” function (if available). - If ecological energy sources are available such as solar panel heating, heat pumps or centralised heating systems, the appliance may be connected to the hot water mains up to a maximum temperature of 60° C. Make sure the water inlet hose is of the correct type (“70°C Max” or “90°C Max”). Child safety - Keep the packaging materials out of the reach of children. If you decide to scrap the dishwasher, it must be disposed of in compliance with local waste disposal regulations. [. . . ] shows “F6” on the display or the START indicator lamp flashes 6 times . . . shows “F7” on the display or the START indicator lamp flashes 7 times . . . shows “F8” on the display or the START indicator lamp flashes 8 times - . . . shows other “F” faults on the display or the START indicator lamp flashes Xx times After taking the above course of action, the fault message must be reset. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WP 76




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WP 76 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.