User manual WHIRLPOOL WRX988SIBE ENERGY GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WRX988SIBE. We hope that this WHIRLPOOL WRX988SIBE user guide will be useful to you.


WHIRLPOOL WRX988SIBE ENERGY GUIDE: Download the complete user guide (42 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WRX988SIBE DIMENSION GUIDE (88 ko)
   WHIRLPOOL WRX988SIBE USE & CARE GUIDE (3720 ko)
   WHIRLPOOL WRX988SIBE INSTALLATION GUIDE (1550 ko)
   WHIRLPOOL WRX988SIBE WARRANTY INFORMATION (93 ko)

Manual abstract: user guide WHIRLPOOL WRX988SIBEENERGY GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 6 For the Plumber For the Electrician Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Service Diagnosis Removal and Replacement Water Reservoir Bin Controls . 33 Parts Lists and Wiring Diagrams are printed on yellow paper in the center of this manual. March, 1989 Page 1 WRX988SIBE FOR THE INSTALLER: Specifications This ice maker-dispenser is designed to be mounted on a machine stand, or a countertop, or using wall mounting kit KWB3, hung from a wall. The sink may be retained, or removed and the optional longer splash panel (KSP1) installed in place of the original. [. . . ] Maintenance and Cleaning should be scheduled at a minimum of twice per year. /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////WARNING//////////////////////////// Electrical power will be ON when doing in place cleaning. /////////////////////////////////////////////////////////////////////////// ICEMAKING SYSTEM: In place cleaning 1. Drain the water reservoir and freezer assembly using the drain tube attached to the freezer water inlet. Return the drain tube to its normal upright position and replace the end cap. ///////////////////////////WARNING////////////////////////////// Scotsman Ice Machine Cleaner contains Phosphoric and Hydroxyacetic acids. ////////////////////////////////////////////////////////////////////////// 7. Prepare the cleaning solution: Mix eight ounces of Scotsman Ice Machine Cleaner with three quarts of hot water. Slowly pour the cleaning solution into the water reservoir until it is full. As the ice maker begins to use water from the reservoir, continue to add more cleaning solution to maintain a full reservoir. After all of the cleaning solution has been added to the reservoir, and the reservoir is nearly empty, switch the master switch to OFF. Check: The 3 reset switches, (circuit board, high and low pressure): depress and release each switch. If the still does not start, check: the spout switch; the high and the low side pressures. Check the low pressure cut out, if closed, go to E; if it is open, it could be due to: · Low refrigerant charge · The auger not turning · Restricted system · TXV not opening 1. Check the low side pressure, the low pressure cut out opens at pressure below 4 psig. Check if the auger is turning, if it is not, remove the gearbox and: Check for internal damage, repair and replace in the machine. Check for low charge, add some refrigerant, if the unit will operate, (normal low side pressure being about 30 psig) stop and look for a leak, repair, replace the drier, evacuate, and weigh in the nameplate charge. If, with added charge, the unit does not operate: Check for a restricted system, replace the drier, evacuate, and weigh in a nameplate charge. Check for a Thermostatic Expansion Valve that does not open, if defective, replace it. Check the high pressure cut out, if closed, go to F; if open: 1. The pressure control opens at 450 psig. Check the high side pressure, reset the control, and observe: on water cooled, that water soon begins to flow from the condenser drain; or, on air cooled, that the fan is forcing air through the condenser. If the unit trips out on pressures below 450 psig, replace the control. [. . . ] Note: The case cover output gear, bearings, and shaft are one pressed together assembly. If the oil level and condition is acceptable, quickly check the gears and bearings. If there is evidence of water in the oil (rusty bearings and gears; the oil having a creamy white appearance; oil level too high) carefully inspect the bearings and gears. Note: The gears and bearings are available only as pressed together sets. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WRX988SIBE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WRX988SIBE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.