User manual WHIRLPOOL WTW4880AW INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WTW4880AW. We hope that this WHIRLPOOL WTW4880AW user guide will be useful to you.


WHIRLPOOL WTW4880AW INSTALLATION GUIDE: Download the complete user guide (5627 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WTW4880AW (6409 ko)
   WHIRLPOOL WTW4880AW (6409 ko)
   WHIRLPOOL WTW4880AW DIMENSION GUIDE (611 ko)

Manual abstract: user guide WHIRLPOOL WTW4880AWINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] IMPORTANT: Do not install, store, or operate washer where it will be exposed to weather or in temperatures below 32° F (0° C). Water remaining in washer after use may cause damage in low temperatures. [. . . ] N To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician. N If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate. N Check with a qualified electrician if you are not sure the washer is properly grounded. NOTE: To avoid floor damage, set washer onto cardboard before moving it and make sure lid is taped shut. Remove shipping base To avoid damaging floor, place cardboard supports from shipping carton on floor behind washer. If your washer includes a sound shield, please refer to the instructions included with the sound shield to install it at this time. Attach drain hose to drain port Remove tape from washer lid, open lid and remove cardboard packing tray from tub. Remove the red plastic plug from the black drain port on the back of the washer. if clamp is not already in place on elbow end of drain hose , slide it over end as shown. Squeeze clamp with pliers and slide black elbow end of drain hose onto black drain port and secure with clamp. For a floor drain, remove the preinstalled drain hose form as shown in Step 7. Place drain hose in standpipe Drain hose form Firmly grasp power cord plug and pull to free from rear panel. Gently place power cord over console to allow free access to back of washer. [. . . ] Rock washer back and forth to make sure all four feet make solid contact with floor. If washer is level, skip to step 15, (on models with metal feet) or step 16 (on models with plastic feet). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WTW4880AW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WTW4880AW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.