User manual X10 DS10A

[. . . ] Door/Window Sensor, Model DS10A Set Up and Operating Instructions Installing the Door/Window Sensor · Attach the Door/Window Sensor to the wall using the mounting screws provided. [. . . ] After replacing the batteries, the following steps are necessary to determine that the Console still recognizes the DS10A. DOOR/WINDOW SENSOR DOOR/WINDOW SENSOR DELAY MAX MIN Ideal location TEST Two windows (requires accessory magnetic switch pair) DOOR/WINDOW SENSOR · Place the Console's slide switch to RUN2. If the Console chimes, it recognizes the DS10A and no further action is necessary. If the Console did not chime: Place the Console's slide switch to INSTALL. To make sure the Console logs the DS10A back into the same zone it was allocated to before you changed the batteries, wait four hours after removing the old batteries before reinstalling (until the appropriate zone indicator on the Console starts flashing). OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Limited One Year Warranty X10. com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. [. . . ] See your Security System Owner's Manual for more information. X10. com, a Div. [. . . ]