User manual X10 TR16A

[. . . ] 7 Features: q Turns on or off up to 10 lights/ appliances over the telephone. q Lets you remotely control up to 8 X10 Modules from any convenient location in your home. You plug lamps and appliances into X10 Modules, and replace wall switches with X10 Wall Switch Modules, to control important inside and outside security lights. q Sends signals to X10 Modules over your existing house wiring (no additional wiring necessary). [. . . ] If you have an answering service provided by your phone company, the service picks up if your phone is not answered, so in this case the service will never pick up. If you have this kind of answering service, install the Touch Tone Controller on a separate phone line. 2 3 HOW IT WORKS INSTALLATION OPERATION The Touch Tone Controller controls lights and appliances throughout your home from any convenient location. You plug lamps into Lamp Modules, appliances into Appliance Modules, and replace wall switches with Wall Switch Modules. Command signals are sent over your existing house wiring to the Module(s) of your choice. It can also be dimmed and brightened from other types of X10 Controller. The Appliance Module turns on and off appliances such as a window fan, air conditioner, or stereo, etc. The Wall Switch Module turns on and off any incandescent light up to 500 watts. It can also be dimmed and brightened from other X10 controllers. 1. Plug the power cord into any functioning 120V AC outlet and plug the phone cord into an RJ11 phone jack. Using a small screwdriver, set the Touch Tone Controller's Housecode dial to the same letter as your X10 Modules (A through P). Set all dials to the OFF position for no security (PIN) code (not recommended). Set the Ans Delay switch to Min (for 15 seconds delay), or Max (for 35 seconds delay) before the unit answers a call. Set all your Modules to the same Housecode as you set on the Touch Tone Controller. Any Module(s) set to the same number as the third digit on the security code dial (on right) flashes on and off when the phone rings. LOCAL To Turn a light or appliance ON or OFF from the keyboard. Press and release the number button (1 8) corresponding to the Unit Code you set on the Module you want to control. This turns on all lights connected to Lamp Modules and Wall Switch Modules which are set to the same Housecode as the Touch Tone Controller. This turns off all Modules which are set to the same Housecode as the Touch Tone Controller, including Appliance Modules. Touch Tone Controller Mini Timer* Number keys Security Code (000 to 999). Last digit sets code for "flashing light. " Housecode Set all your Modules to the same letter Wall Switch Module* Lamp Module* Appliance Module* All Lights On key REMOTE 1. If you do NOT own an answering machine, the Touch Tone Controller answers after 15 or 35 seconds (depending on the position of the delay switch) and gives three beeps. In this case the Touch Tone Controller will do nothing until you enter its PIN. Enter your security code (PIN) from the touch tone keypad on the phone you are calling from. Press the touch tone number key corresponding to the X10 Module you want to control. [. . . ] Don't use the Wall Switch Module for fluorescent lamps, ceiling fans, low voltage lights, or any kind of appliance. Not compatible with DS7000 and DC8700 security systems. 7 Limited One Year Warranty X10 WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X10 PRODUCT IF RETURNED TO X10 WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE. THIS WARRANTY DOES NOT EXTEND TO ANY X10 PRODUCTS WHICH HA BEEN SUBJECT VE TO MISUSE, NEGLECT, ACCIDENT, INCORRECT WIRING OR TO USE IN VIOLATION OF OPERATING INSTRUCTIONS FURNISHED BY US, NOR EXTEND TO ANY UNITS ALTERED OR REPAIRED FOR WARRANTY DEFECT BY ANYONE OTHER THAN X10. [. . . ]