User manual XEROX PHASER 6125

[. . . ] Phaser® 6125 color laser printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, and Walk-Up® are trademarks of Xerox Corporation in the United States and/or other countries. [. . . ] Select Labels, and then press the OK button. Using the Driver To print on labels using the print driver: 1. Select this printer as the printer to be used and click Properties to display the dialog box. Click OK. Phaser® 6125 Color Laser Printer 4-25 Printing on Specialty Media Printing Glossy Paper Glossy paper can be printed from any tray. To order paper, transparencies, or other specialty media, contact your local reseller or go to www. xerox. com/office/6125supplies. Guidelines Do not open sealed packages of glossy paper until you are ready to load them into the printer. Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to use. Long periods of storage in extreme conditions can cause glossy paper to curl and jam the printer. Printing Glossy Paper from the Paper Tray 1. Gently pull open the paper tray, and open the paper guides. 6125-080 Phaser® 6125 Color Laser Printer 4-26 Printing on Specialty Media 2. Fan the glossy paper to release sheets that are stuck together. 6125-014 Phaser® 6125 Color Laser Printer 4-27 Printing on Specialty Media 4. Insert the glossy paper into the paper tray, and adjust the paper guides to fit the paper. In the printer driver, select either Glossy Paper as the paper type or Tray as the paper tray. Printing Glossy Paper from the Manual Feed Slot 1. Slide the width guides of the manual feed slot to fit the appropriate media. 6125-020 Phaser® 6125 Color Laser Printer 4-28 Printing on Specialty Media 2. Place the side to be printed facedown with the top of the page toward the front of the printer. 6125-079 4. If necessary, press the paper guides inward to fit the paper. Phaser® 6125 Color Laser Printer 4-29 Printing on Specialty Media Printing on Glossy Paper Using the Control Panel To print on glossy paper using the control panel: 1. Select Glossy Paper, and then press the OK button. Using the Driver To print on glossy paper using the print driver: 1. Select this printer as the printer to be used and click Properties to display the dialog box. Click OK. Phaser® 6125 Color Laser Printer 4-30 Printing Custom Size Printing Custom Size This section explains how to print on custom size paper, such as long paper using the print driver. The way to load custom size paper in the paper tray is the same as the one to load standard size paper. See also: Loading Paper in the Manual Feed Slot on page 4-12 Loading Paper in the Paper Tray on page 4-8 Setting Paper Types and Sizes on page 4-7 Defining Custom Paper Sizes Before printing, set the custom size on the print driver. Note: When setting the paper size on the print driver and control panel, be sure to specify the same size as the actual paper used. This is especially true if you configure a bigger size when using a narrow width paper. Using the Driver On the print driver, set the custom size in the Custom Paper Size dialog box. For Windows 2000 or later, an administrator's password only allows users with administrator rights to change the settings. Users without the rights of administrator can only check the contents. [. . . ] This command can only be used when the full access password is specified by the #Password command. Example of Commands 1. When the read only password is "ronly", and to check the printer status: #Password ronly #Status 2. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com": #Password admin #SetMsgAddr service@xerox. com 3. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com", then confirm the setting result on the network settings list: #Password admin #SetMsgAddr service@xerox. com #NetworkInfo Note: Describe the "#SetMsgAddr" command before the "#NetworkInfo" command. [. . . ]