User manual XEROX PHASER 6280

[. . . ] Phaser® 6280 Color Printer Phaser 6280 User Guide ® Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, PrintingScoutTM, and Walk-Up® are trademarks of Xerox Corporation in the United States and/or other countries. [. . . ] The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. Click OK three times. Printing on Custom Size Paper Use the following procedures to print using either the PCL or PostScript drivers. Using the PCL Driver The procedure to print on custom size paper using the PCL print driver is as follows. Select this printer as the printer to be used and click Preferences or Properties. Click Print in the Print dialog box to start printing. Phaser® 6280 Printer 83 Printing Custom Size or Long Paper Using the PostScript Driver The procedure to print on custom size paper using the PostScript print driver is as follows. Select this printer as the printer to be used and click Preferences or Properties. Specify the length of the short edge and long edge under Custom Size Settings. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. 9. Phaser® 6280 Printer 84 Printing Confidential Documents - Secure Print Printing Confidential Documents - Secure Print When the hard drive or additional memory is added, you can use the secure print feature. Note: The data stored in the RAM disk is erased when the printer is switched off. About Secure Print Secure Print is a feature that allows you to assign a password to a print job from the computer, send it to the printer for temporarily storing, and start printing the data from the control panel. You can also store the print data in the printer without attaching a password. By storing frequently-used data in the printer, you can print the data with just an operation from the printer, and without sending the data from the computer repeatedly. Note: You can select whether to delete secure print data after printing. See also: Printing from the Control Panel on page 88 System Setup on page 98 Configuring Secure Print The procedure to configure Secure Print using the PCL or PostScript print driver is as follows. Follow the steps for the secure print settings at the computer and send data to the printer for printing. Then, follow the steps for the output procedure at the printer to output the printed pages. Printing from the Computer Note: Ensure the RAM disk is set to available. You can find this under the Options tab using the PCL print driver or the Device Settings tab using the PostScript print driver. For instructions about enabling options, see Enabling Options on page 134. If you want to use a specified document name to access the document from the control panel: a. In the Document Name field, enter the name that will appear on the control panel. Phaser® 6280 Printer 85 Printing Confidential Documents - Secure Print 9. If you want the printer to automatically name the document using a time stamp, in the Retrieve Document Name field, select Use Existing Name. [. . . ] Note: Grayscale images printed with the composite black setting count as color pages, because color consumables are used. When doing 2 sided printing, a blank page may be inserted automatically depending on the settings on the application. Press either the Up Arrow or Down Arrow button until Billing Meter is displayed, and then press the Forward Arrow or OK button. Press the Up Arrow or Down Arrow button until the desired meter is displayed. [. . . ]