User manual XEROX WORKCENTRE 3550

[. . . ] Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Xerox® and the sphere of connectivity design are trademarks of Xerox Corporation in the United States and/or other countries. Before you use your machine, take some time to familiarize yourself with the various features and options. 2 Sided: Use to select whether your originals are 1 sided or 2 sided, or to produce 1 or 2 sided output. [. . . ] The Printing window appears, allowing you to monitor the status of your print job. You can print many different types of files on your machine using the standard CUPS method, directly from the command line interface. The drivers package replaces the standard lpr tool with a much more user-friendly LPR GUI program. Type lpr <file_name> from the Linux shell command line and press Enter. When you type only lpr and press Enter, the Select file(s) to print window appears first. In the LPR GUI window, select your machine from the list, and change the print job properties. Using the Printer Properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. If you change the machine port from USB to parallel or vice versa while in use, you must re-configure the machine port in this tab. ⷠDriver: This option allows you to view or select another machine driver. Click Add to Class to add your machine to a specific class or click Remove from Class to remove the machine from the selected class. Click OK to apply the changes and close the Printer Properties window. USB memory devices are available with a variety of memory capacities to give you more room for storing documents. Your machine supports USB memory devices with FAT16/FAT32 and sector size of 512 bytes. ⷠYou must use only an authorized USB memory device with an A plug type connector. ⷠUse only an USB memory device with metal-shielded connector. Insert the USB memory device into the USB memory port on your machine. cAUTIONS: · Do not remove the USB memory device while it is in use. ⷠIf your USB memory device has certain features, such as security settings and password settings, your machine may not automatically detect it. For details about these features, see your USB memory device User Guide. You can scan a document and save the scanned image onto a USB memory device. When the USB Memory Device is inserted into the USB memory port, the option to Scan To USB is automatically displayed. If this option is selected, the machine immediately scans your documents using the default scan settings. [. . . ] Country codes should be set prior to connecting this device to the network. Note: Although this device can use either loop disconnect (pulse) or DTMF (tone) signaling, it is recommended that it is set to use DTMF signaling. Modification of this device, connection to external control software or to external control apparatus not authorized by Xerox, will invalidate its certification. Contact your Xerox sales representative (1-800-ASK-XEROX) to determine whether this Xerox device is part of the program. [. . . ]