User manual XEROX WORKCENTRE 450C CUSTOMER SELF SERVICE FEED ROLL CLEANING KIT

[. . . ] CUSTOMER SELF SERVICE Feed Roll Cleaning Kit Xerox - DOCUMENT WorkCentre 450c / 450cp The purpose of the instructions is to provide a step by step procedure to correct a paper feed problem. [. . . ] Inserting the Feed Roll Cleaning Pad into the Paper Tray Page 1 of 2 Feed Roll Cleaning Kit 4. q Press the Feed button for approximately one second and release (See Figure 2). This will engage the feed rollers for a short period of time and allow the Feed Roll Cleaning Pad to clean and restore the surface texture of the feed rollers. 6. Step 1: Press the Feed button for approximately one second and release. Enter FAX COPY PRINT SCAN Mode Size copy Job Status Confirm CoverPage Ext/Clear q q q Menu Superfax Fax Darken Standard Reverse the Feed Roll Cleaning Pad in the Scan Feed Photo Normal Lighten Resolution Contrast Cartridge paper Tray (long edge down) with the white side facing out. Remove the Feed Roll Cleaning Pad with the ¼ inch stack of paper and insert fresh 20 lb. Insert the Printer Output Tray and make a print. · This completes the Instructions. Call: Thank You for choosing The Document Company 1 - 800 - TEAM XRX (1 - 800 - 832 - 6979) XEROX HINT: It would be a good idea to save the contents of this kit for future use if the Feed Rolls become contaminated again. [. . . ] Printed in the United States of America XEROX®, The Document Company ®, the stylized X and the identifying product names and numbers herein are trademarks of XEROX CORPORATION. F 709P00850 Rev A March 2000 DRB-FILE Page 2 of 2 [. . . ]