User manual YAMAHA BCS20W-210
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual YAMAHA BCS20W-210. We hope that this YAMAHA BCS20W-210 user guide will be useful to you.
You may also download the following manuals related to this product:
YAMAHA BCS20W-210 (5890 ko)
Manual abstract: user guide YAMAHA BCS20W-210
Detailed instructions for use are in the User's Guide.
[. . . ] Retain this Owner's Manual in a safe place for future reference.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
1 2 3 4 5 6 7
Read Instructions All the safety and operating instructions should be read before the product is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. [. . . ] 14
English
SETTING UP THE SPEAKERS
Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below.
Speaker configuration
This speaker package employs a 7 speaker configuration: 2 main speakers, 2 rear speakers, a center speaker, a rear center speaker and a subwoofer. The rear and rear center speakers are used for surround sounds, and the center speaker is for center sounds (dialog etc. ). The subwoofer is for reinforcing low frequencies on your audio system.
Placing speakers
Main speakers: Rear speakers: On both sides of and at approximately the same height as the TV set. Precisely between the main speakers.
Center speaker:
Rear center speaker: Precisely between the rear speakers. Subwoofer: The position of the subwoofer is not so critical because low bass tones are not highly directional. Refer to "Placing the subwoofer" below for a recommended positioning of the subwoofer.
Main L
Center
Main R Subwoofer
Subwoofer Main R Center Main L TV-set Rear R Rear L Rear center Rear R Rear center
Rear L
Placing the subwoofer Å i
It is recommended to place the subwoofer on the outside of either the right or the left main speaker. i is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel out each other. To prevent this from happening, face the subwoofer system at an angle as shown in fig. Note There may be a case that you cannot obtain enough superbass sounds from the subwoofer when listening in the center of the room. * Connect each speaker making sure not to reverse the polarity (+, ). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass. * For the main and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals.
Note When connecting to a monaural line output terminal of the amplifier, connect to the L/MONO INPUT2 terminal.
E-7
How to connect speaker cables to the input and output terminals of the speakers
For connections, keep the speaker cables as short as possible. If the connections are faulty, no sound will be heard from the speakers.
Main/center/rear/rear center speakers
One side of the provided speaker cable has a white broken line and the other side has no line. Connect the (+) terminals on both the speaker and the amplifier using the side with a white broken line. Connect the () terminals on both components using the side with no line. For NS-M104 (main speaker) Red: positive (+) Black: negative ()
Before connecting
Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.
1 3
How to connect:
For NS-M104 (main speaker)
2
White broken line
1 Loosen the knob, as shown in the figure. 3 Tighten the knob and secure the cable.
Test the firmness of the connection by pulling lightly on the cable at the terminal. For NS-E114 (rear/rear center speaker), NS-C104 (center speaker) and subwoofer's INPUT1/OUTPUT terminals
For NS-E114 (rear/rear center speaker) and NS-C104 (center speaker) White broken line Red: positive (+) Black: negative ()
1 Press and hold the terminal's tab, as shown in the
figure.
2 Insert the bare wire. 3 Release your finger from the tab and secure the cable.
Test the firmness of the connection by pulling lightly on the cable at the terminal.
Subwoofer's INPUT1/OUTPUT terminals
Connect the (+) terminals on both the subwoofer and the amplifier using one side of the cable. Connect the () terminals on both components using the other side of the cable. [. . . ] 50W Maximum Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB/2. 83V/m Crossover Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 x 300 x 167 mm (5-1/2" x 11-13/16" x 6-9/16") Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advanced Yamaha Active Servo Technology Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA BCS20W-210
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA BCS20W-210 will begin.