User manual ZENITH L15V36 OPERATING GUIDE

[. . . ] Operating Guide | Warranty Model Numbers | L15V36, L20V36 | LCD TV © Copyright 2003, Zenith Electronics Corporation. RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO. _______________________________ SERIAL NO. _______________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] Connect the PC audio output to the TV's PC SOUND input. q q PC INPUT PC SOUND VIDEO (MONO) L VIDEO IN AUDIO R TV Connections Panel PC Connections Panel 2 Viewing Setup q q Turn on the PC/Computer. Turn the TV on and use tv/video button to select RGB-PC source. RGB-PC tv/video On Remote Control 206-3922 22 Displayable Monitor Output Format Specifications MODE Resolution 640x350 640x350 640x400 VGA 640x400 640x480 640x480 640x480 640x480 640x480 800x600 SVGA 800x600 800x600 800x600 800x600 (MAC) 832x624 1024x768 1024x768 XGA 1024x768 1024x768 Horizontal Frequency (KHz) 31. 4KHz 37. 8KHz 31. 4KHz 37. 8KHz 31. 5KHz 35KHz 37. 9KHz 37. 5KHz 43. 3KHz 35. 2KHz 37. 9KHz 48. 1KHz 46. 9KHz 53. 7KHz 49. 7KHz 48. 4KHz 56. 5KHz 60. 2KHz 68. 7KHz Vertical Frequency (Hz) 70Hz 70Hz 85Hz 60Hz 66Hz 72Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 75Hz 60Hz 70Hz 75Hz 85Hz 85Hz Notes: a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc. ) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). If the message "Out of range" appears on the screen, adjust the PC output to a format listed in the `Displayable Monitor Output Format Specifications' chart above. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automatically switches to DPM mode. 206-3922 23 CONNECTIONS PC Mode Functions Check (L15V36 Only) - After setup, be sure to select RGB-PC source on TV. 1 Press the menu button and then use channel (D, E) buttons to display the available menus shown below. Channel CH. edit Favorite ch. EZ Video User G G FG FG Move G Next Move G Next Special CH. CH. Sound G G PC PIP EZ Audio Balance AVL G G G FG FG Move G Next Move G Next Timer CH. Clock Off timer On timer Auto off G G G G FG Move G Next 2 24 Press the volume (G) and then use the channel (D, E) buttons to select menu options. - You're not available to use the Channel menu in Video1-2, S-Video, Component or RGBPC mode. If you operate the channel menu, PC mode is chaged to TV source automatically. 206-3922 PC Mode Adjustments (L15V36 Only) - Be sure to select the RGB-PC source before operation. PC Setup 1 Use the menu button and then channel (D, E) buttons to select the Special Menu. 3 Press the volume (G) and then use the channel (D, E) buttons to select an option you want to adjust. Special CH. PC Setup G G PC PIP (H-position) G G (V-position) G Clock G Phase G Auto configure G Reset G FG 0 FG Move G Next Move G Next F Back q Each press of channel (D, E) buttons sequences through the menu options shown below. 2 Press the volume (G) and then use the channel (D, E) buttons to select the PC option. H-position V-position Reset Clock Auto configure Phase 206-3922 25 CONNECTIONS PC Mode Adjustments (L15V36 Only) 4 Press the volume (G) and then use the volume (F, G) buttons to make appropriate adjustments. PC Setup H-Position V-Position Clock Phase Auto configure Reset FG G G G G G G 0 Adjust A Back q q q q q H-Position/V-Position : Adjusts picture left/right and up/down. Clock : Minimizes any vertical bars or stripes appearing on the screen background. Phase : Allows you to remove any horizontal noise and clear up or sharpen the character images. Auto-configure : Automatically adjusts the screen position, clock and clock phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress. ) Reset : Returns to the default settings programmed at the factory; default settings cannot be changed. 5 Press the exit button to save. - Some signals from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually. If you need to adjust PC setup, turn off PIP first. 206-3922 26 - Be sure to select the RGB-PC source before operation. - PIP (Picture In Picture) lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. 1 Press the pip button to turn PIP on. 1 Use the pip input button to select the PIP Input Menu. PIP Picture Main Picture PIP Off PIP input TV 2 Use the pip button to select the PIP sub picture size. q 2 Use the pip input button to select the input source for the PIP picture. q Each press of pip button changes the screen display as shown below. Each press of the pip input button changes the input source as shown below. Off PIP (S) TV Video 1 Video 2 PIP (L) PIP (M) Component S-Video 3 206-3922 Press the exit button to save. 3 Press the exit button to save. 27 CONNECTIONS PIP (Picture-in-Picture) On/Of f and PIP size Selecting the PIP source PC Mode Adjustments (L15V36 Only) Moving the PIP Sub Picture TV Source Selection for PIP Picture 1 Press the position button. 1 Use the PIP ch (D, E) button to select a channel for PIP sub picture. RGB-PC TV 5 q If you press the PIP ch (D, E) when selecting the Video1-2, S-Video or Component source for the PIP picture, input source for PIP changes to TV source. 2 Use the channel (D, E) buttons or volume (F, G) buttons to move the PIP picture. The PIP sub picture moves up/down and left/right. 2 3 Press the exit button to save. Press the exit button to save. 206-3922 28 - PIP Mode: Sound Source Selection Options PIP sound options 1 Press the menu button and then channel (D, E) buttons to select the Special menu. Special CH. 4 Press the volume (G) and then use the channel (D, E) buttons to select: main picture sound [PC] or sub picture sound [PIP]. PC PIP G G PIP Menu PIP Input Channel Position Sound G G G G G Move G Next PC PC PIP FG FG Move F Back 2 3 Press the volume (G) button. q Each press of channel (D, E) buttons changes the sound option as shown below. PC PIP Press the volume (G) and then use the channel (D, E) buttons to select the Sound option. PIP Menu PIP Input Channel Position Sound input G G G G G G 5 PC PIP Press the exit button to save. FG Move G Next F Back 206-3922 29 CONNECTIONS Turning the TV On TV Operation Overview 1 2 3 1 2 3 First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. Press on/off located on the TV side panel. q Press power on the remote control to put the TV into standby mode. [. . . ] Be sure to turn the power off and pull out the plug before you begin any cleaning. Screen Cleaning 1. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen. Make sure not to put an excessive amount of water on the screen, let it air-dry before you turn on your TV. Cabinet Cleaning 1. [. . . ]