User manual ZEROTHERM GX700

[. . . ] 2) Attach the back plate to the back side of a motherboard with the socket RM (Retention Mechanism) holes lined up. [. . . ] 3) Place the cooler on a CPU with all of mounting screw holes well aligned. 4) To guarantee the maximum cooler performance of the heat pipe-based cooler, ZEROtherm, the RIGHT installation to the right DIRECTION is VERY important as shown in picture (1). 5) Fasten the spring screws fitting on the RM holes. : (O) Bent Heat Pipes : (X) Memory Slot : (X) : (X) Features Fan Speed (rpm) 2300 1) Copper-based heat pipe cooling system for maximum thermal performance. 2) MAX performance and MIN noise with optimized heat block and fin structure. When "CPU Fan Error!" alerts, set the Bios up as followings BIOS Set-up Booting Error ­ CPU Fan Error Bios Setup ­ Boot tap A few kinds of motherboards (including ASUS one) may report "CPU Fan Error" Press "DEL" button on your keyboard to set the Bios up. Select "Boot" tap and "Boot Settings Configuration" Boot Settings Configuration Wait For `F1' If Error Options Select "Wait For `F1' If Error Press "Enter" button on you keyboard. Switch its options into "Disabled". Wait For `F1' If Error ­ Disabled Save configuration changes and exit Now Wait For `F1' If Error options are Disabled. Press "F10" button on your keyboard. Select "OK", when the prompt ask if you want to save configuration changes and exit now. [. . . ] Switch its options into "Disabled". Wait For `F1' If Error ­ Disabled Save configuration changes and exit Now Wait For `F1' If Error options are Disabled. Press "F10" button on your keyboard. [. . . ]