User manual BEKO 28422VND/S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BEKO 28422VND/S. We hope that this BEKO 28422VND/S user guide will be useful to you.


BEKO 28422VND/S : Download the complete user guide (3250 Ko)

Manual abstract: user guide BEKO 28422VND/S

Detailed instructions for use are in the User's Guide.

[. . . ] The connection to the mains is carried out as follows: BROWN = L line BLUE = N neutral If not provided, connect a plug for the electrical load indicated on the description label. Where a plug is provided, the cooker hood must be installed in order that the plug is easily accessible. An omnipolar switch with a minimum opening of 3mm between contacts, in line with the electrical load and local standards, must be placed between the appliance and the network in the case of direct connection to the electrical network. The distance between the supporting surface of the cooking appliance on which the cooking recipients are placed and the lower part of the kitchen hood must be a minimum of 45 cm, whether it is an electric hob, a gas hob or an induction hob. [. . . ] Before starting to fix the hood, disconnect the anti-grease filter B (Fig. Before this operation, perform the following steps depending on the model purchased: MODEL 1 Remove the 3 panels A as shown in Fig. WALL FIXING Mark the position of the lower side of the hood on the wall (Fig. - Position the fixing template on the wall, making sure that the line coincides with the line previously made on the wall. - Mark the fixing holes and cut them into the material (Fig. - Place the appliance against the wall, align it in horizontal position and tighten screws K (Fig. - Once the adjustment has been completed, fix the hood using the 2 screws C (Fig. - When carrying out the fixing operations, use only screws and screw anchors suited to the type of wall (e. - If the screws and screw anchors are supplied with the appliance, make sure that they are suited to the type of wall to which the hood must be fixed. - Fix the lid once again by using the 4 screws previously removed in (Fig. OPTIONAL ACCESSORIES This model may have decorative ducts as optional accessories - ask your retailer for information. To replace the halogen light bulbs B, remove the glass panel C using a lever action on the relevant cracks. If the cooker hood is at speed level 1 it will not be necessary to depress the push-button to switch the cooker hood off. Touching the key at 3rd speed, the intensive function runs for 10', then the appliance go back to work at the original speed. Key E = The Timer times the functions on activation for 15 minutes, after which they are switched off. When the Timer is activated the decimal point must flash on the display. The "clean air" function is activated by pressing key E for 2 seconds when the appliance is switched off. This switches the motor on for 10 minutes every hour at the first speed. During functioning a rotary movement of the peripheral segments must be visualised on the display. When this time has passed the motor switches off and the fixed letter "C" must be visualised on the display until the motor re-starts after 50 minutes for another 10 minutes and so on. Press any key apart from the light keys to return to normal functioning. Active carbon/grease filter saturation: - When display item C flashes, at a speed where it alternates with the letter F (e. [. . . ] After the clean filter has been positioned correctly, the electronic memory must be reset by pressing button A for approximately 5 seconds, until the indication F or A 16) LUMINOUS the key symbols are explained below: A = LIGHT B = OFF C = SPEED I D = SPEED II E = SPEED III F = AUTOMATIC STOP TIMER - 15 minutes (*) · If your appliance does not have the INTENSIVE speed function, press key E for two seconds and it will be activated for 10 minutes after which it will return to the previously set speed. To interrupt it before the 10 minutes have expired press key E again. By pressing key F for two seconds (with the hood switched off) the "clean air" function is activated. This function switches the appliance on for ten minutes every hour at the first speed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BEKO 28422VND/S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BEKO 28422VND/S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.