User manual COMPRO S500 START UP GUIDE

[. . . ] 8 ComproDTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ComproDVD 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 1 About This Guide This manual tells you how to install and use your VideoMate S500 DVB-S USB 2. 0 Tuner Box. [. . . ] LNB Settings This settings need to follow the instruction from the Satellite's LNB spec. If you already have other working device that can receive the signal from the satellite (i. e. If you still have problem with LNB settings, please contact your satellite dish provider for correct information. DiSEqC1. 2 motor control setting Compro S500 supports DiSEqC 1. 2 version. If you have installed motor that compatible to DiSEqC, it may aim to different satellite to receive different satellite's channels. 11 3. 2 ports 22KHz switch / 2 ports mini DiSEqC switch / 4 ports DiSEqC1. 0 switch / 4 ports DiSEqC1. 2 switch These four settings are similar to Single mentioned above. The difference is these four settings have connected the LNB to the TV Box through a switch. Please refer to the picture in each setting to confirm which switch you are using, and then continue with the advance settings. Each of these mode will have 2~4 tabs to switch between different satellites (i. e. under "4 ports DiSEqC1. 2 switch" will have Port S1, Port S2, Port S3, and Port S4 tab) Note Compro S500 supports up to 4 ports DiSEqC switch. Before using auto scan, you may need to confirm the LNB connection and settings are correctly setup. After channel scanning, ComproDTV will receive the correspondent channels of the satellite. For information on above settings, please refer to your satellite installer. Please always press "Apply" before using "Autoscan" and "DiSEqC motor control". 12 Channel Display Pull-down list Select all satellite TV channels or specific satellite TV only Free to Air Only Free-to-Air channels Radio Only radio channels Scrambled Only scrambled channels Note After one of above selection made, only the selected list will be used by the channel up/down buttons on the control panel. Channel Naming You can customize the channel names by double-click on the Description field of the channel you wish to rename. For digital TV channels, you can do more changes on the channel's property by right-click the mouse on the Description field of the channel for edit. Set Mem+ During the Autoscan process, ComproDTV automatically detects and enables channels with a valid signal. By default, every available channel will be enabled and marked with the green icon. However, you can shorten the list of enabled channels to reduce channel-browsing time. Customize your list by enabling or disabling channels from the channel list by clicking on the green icon. Disabled channels will not be shown when you use the channel Up and Down or channel surfing functions. 13 Set Lock (Parental Control) By default, ComproDTV lets you access all available channels. A Parental Control feature allows you to restrict the viewing of certain channels altogether or during limited times. You can lock a channel by clicking in the column labeled Lock next to the channel number you wish to restrict. You can see the screen capture dialog as below. Recording ComproDTV is a digital video recorder and save the digital TV program to MPEG-2 and TS (Transport Stream) format to your hard disk. ComproDTV starts recording the video source currently showing in the display window. [. . . ] If you see it shows "No Device, " your drivers may not be not properly installed. Please remove ComproDTV using "Add/Remove programs" in the Control Panel and reinstall it. Please check if there are any microwaves or lights that may be doing this. And make sure as few cables as possible are crossing the IR receiver. 21 Contacting Compro Technical Support Before you submit an email for support, please check support FAQs on our web site. [. . . ]