User manual GATEWAY 56 Hardware Guide
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GATEWAY 56. We hope that this GATEWAY 56 user guide will be useful to you.
 |
GATEWAY 56 Hardware Guide: Download the complete user guide (1068 Ko) |
Manual abstract: user guide GATEWAY 56Hardware Guide
Detailed instructions for use are in the User's Guide.
[. . . ] Gateway 56-inch HD-Ready DLP TV Lamp Replacement
You should replace the lamp in your DLP TV approximately every 6000 hours to maintain the best possible display image. [. . . ] 2 Disconnect the power cord and all other external cables.
1
3 Let the lamp cool completely (approximately 45 minutes). 4 Locate the lamp bay.
Lamp bay
2
5 Loosen the two lamp access panel screws, then remove the access
panel. These screws cannot be removed.
Screws
3
6 Remove the two lamp module retaining screws.
Screws
4
7 Use the lamp removal handle to lift the lamp module straight out
of the lamp bay.
5
8 Insert the new lamp module into the lamp bay.
Caution Make sure that you do not touch the front of the lamp. The oils from your hands can cause the lamp to fail prematurely.
9 Replace the two lamp module retaining screws.
Important Make sure that the screws are fastened securely so the lamp will not shake.
10 Replace the lamp bay access panel, then tighten the two access
panel screws.
11 Connect the power cable and all external cables.
6
© 2004 Gateway, Inc. [. . . ] All other brands and product names are trademarks or registered trademarks of their respective companies.
7
MAN 56" RPTV LAMP INST GDE R0 6/04
8 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GATEWAY 56
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GATEWAY 56 will begin.