User manual GIGABYTE GS-A22C0
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GIGABYTE GS-A22C0. We hope that this GIGABYTE GS-A22C0 user guide will be useful to you.
Manual abstract: user guide GIGABYTE GS-A22C0
Detailed instructions for use are in the User's Guide.
[. . . ] GS-A22C0
Dual LGA2011 socket motherboard for Intel® Xeon® E5-2600 processors
Service Guide
Rev. The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For detailed product information, carefully read the Serice Guide.
For product-related information, check on our website at: http://www. gigabyte. com
Preface
Before using this information and the product it supports, please read the following general information. [. . . ] (Pressing <Esc> can also carry out this task. )
Advanced
Chipset
Security
Server Management Boot Exit
BIOS Setup
- 36 -
5-1 The Main Menu
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the menu. Help for each item is in the Item Help block on the right side of the submenu. • When the system is not stable as usual, select the Restore Defaults item to set your system to its defaults. • The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.
- 37 -
BIOS Setup
Project Version
BIOS Build Date and Time BMC Information BMC Firmware Version SDR Reversion FRU Version
Display version number of the project.
Displays the date and time when the BIOS setup utility was created.
Display version number of the Firmware setup utility. Display the FRU reversion information.
Processor Information CPU Type/ Max CPU Speed/ CPU Signature / Processor Cores / Microcode Patch Memory Information Total Memory / Current Memory Speed System Date
Displays the technical specifications for the installed processor.
Displays the technical specifications for the installed memory. Set the system time following the hour-minute- second format.
System Time
BIOS Setup
- 38 -
5-2 Advanced Menu
The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen.
- 39 -
BIOS Setup
5-2-1 PCI Subsystem Settings
PCI Express Slot 1 ROM
When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN devices and initialize device expansion ROM. Default setting is Disabled.
Onboard LAN1/2 Controller
Onboard LAN I/O ROM Option
Onboard LAN1/2 I/O ROM
PCI 64bit Resources Handling Above 4G Decoding
PCI Common Settings PCI Latency Timer
Enable/Disable Above 4G Decoding. Default setting is Disabled.
Configure PCI Latency Timer. Options available: 32 PCI Bus Clocks/64 PCI Bus Clocks/96 PCI Bus Clocks/128 PCI Bus Clocks/160 PCI Bus Clocks/192 PCI Bus Clocks/224 PCI Bus Clocks/248 PCI Bus Clocks. - 40 -
BIOS Setup
VGA Platte Snoop
Enable/Disable VGA Palette Tegisters Snooping. When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI. Press [Enter] for configuration of advanced items.
PERR Generation
SERR Generation
PCI Express Settings
- 41 -
BIOS Setup
5-2-1-1 PCI Express Settings
PCI Express Device Register Settings Relaxed Ordering
Enable/DIsable PCI Express Device Relaxed Ordering feature. Wnen this feature is enabled, the system will allow device to use 8-bit Tag field as a requester. Set maximum playlooad for PCI Express Device or allow system BIOS to select the value. Options available: Auto/128 Bytes/256 Bytes/512 Bytes/1024 Bytes/2048 Bytes/4096 Bytes. Set maximum Read Reuest size for PCI Express Device or allow system BIOS to select the value. [. . . ] 65535(0xFFFF) means indefinite waiting. " Press the numberic keys to input the desired value. Default setting is Enabled.
Bootup NumLock State
Quiet Boot
Fast Boot
This BIOS feature alows you to decrease the time it takes to boot up the system by skipping certain booting procedures. Default setting is Disabled.
- 81 -
BIOS Setup
Boot Option Priorities Boot Option #1/#2/#3/#4
Press Enter to configure the boot priority. By default, the server searches for boot devices in the following secquence: 1. UEFI device. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GS-A22C0
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GS-A22C0 will begin.