User manual HP DESIGNJET 350C PRINTER
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP DESIGNJET 350C PRINTER. We hope that this HP DESIGNJET 350C PRINTER user guide will be useful to you.
You may also download the following manuals related to this product:
HP DESIGNJET 350C PRINTER DESIGNJET 330/ 350C 플로터 사용자 설명서 (7327 ko)
HP DESIGNJET 350C PRINTER DESIGNJET 330/ 350C 플로터 사용자 설명서 (7030 ko)
HP DESIGNJET 350C PRINTER DESIGNJET 300 시리즈 사용자 설명서 1/2 (7.0MB) (7030 ko)
HP DESIGNJET 350C PRINTER DESIGNJET 300 시리즈 사용자 설명서 2/2 (7.3MB) (7327 ko)
HP DESIGNJET 350C PRINTER PRINTERS - SUPPORTED CITRIX PRESENTATION SERVER ENVIRONMENTS (365 ko)
Manual abstract: user guide HP DESIGNJET 350C PRINTER
Detailed instructions for use are in the User's Guide.
[. . . ] C4699-90031 English
User's Guide
HP DesignJet 330 and 350C Plotters
Finding information
This User's Guide for the HP DesignJet 330 and 350C plotters contains the following types of information: setup use maintenance troubleshooting reference material. To help with finding specific information, a comprehensive table of contents is provided at the front and an alphabetical index is provided at the back. You will notice the use of symbols in the left margin and shaded backgrounds to the text. These are used to identify different types of information as follows:
330 350C
Information specific only to the HP DesignJet 330 is shown like this.
Information specific only to the HP DesignJet 350C is shown like this.
All other information is applicable to both plotters. [. . . ] Any plot that was in the plotter's memory before you printed the Black Cartridge Alignment Sheet has been lost and so, to print it, you must resend it.
56
Special internal plots Using the Color Cartridge Test Sheet
350C
Using the Color Cartridge Test Sheet
Some of the circumstances in which it is useful to use the Color Cartridge Test Sheet are explained in chapter 9, "Troubleshooting". It achieves two objectives: It tells you which cartridge, if any, is not performing correctly. It lets you check the alignment of the four cartridges to each other and, if necessary, adjust it. 1 Load a sheet of A-size or A4-size plain paper, in portrait orientation. Make sure you have selected Plain as the media type on the front panel (see page 23). For this plot, the plotter sets the print quality level automatically.
Plot will be on underside.
1750
For help on how to load a sheet, either refer to the pictures on the right-hand side of the plotter's media-entry slot, or see the section starting on page 29. Note that you cannot print the Color Cartridge Test Sheet on roll media. To load a sheet with the the roll-feed option installed, see page 226.
57
5
INTERNAL PLOTS
Special internal plots Using the Color Cartridge Test Sheet
2
When you have correctly loaded the sheet (when the Ready light is on and steady), press the Continue Plotting keys simultaneously. An example is shown on page 59.
Form Continue Feed + Plotting
3 When the Load Media light comes on (not flashing), the plot is finished. Notice that there are two parts, related to two quite distinct tasks: The part headed To check the nozzles lets you see if any of the cartridges is not printing correctly. It is to be used when cleaning the nozzles (priming) see page 77. Some examples of the patterns when a cartridge is not printing correctly are shown here:
White streak
1002
White gaps
58
Special internal plots Using the Color Cartridge Test Sheet
HP DesignJet 350C
Color Cartridge Test Sheet
To check the nozzles
Examine the patterns below. If any color has gaps or streaks, then that cartridge is either out of ink or needs priming (see User's Guide).
To check the cartridge alignment
1 2
In each of the six boxes below, look for the best pair of lines. Jagged lines = bad If the current setting is not the best pair, change it by filling in the oval above the best pair. Straight lines = good Current Pencil or black pen
Best
3
If you changed any setting, reload the sheet as shown here.
a
Setup
b
Ready
59
5
INTERNAL PLOTS
Special internal plots Using the Color Cartridge Test Sheet
The part headed To check the cartridge alignment lets you check and, if necessary, adjust the alignment between the cartridges, in response to a print quality problem see page 912. You don't need to use both parts of the Color Cartridge Test Sheet each time you print it. Notice that, if you change any of the settings on the sheet (by marking an oval different from the currently selected ones), you must reload it, as as explained in steps 5 through 7, for the plotter to readjust itself. 5 Having marked the appropriate ovals, reverse the sheet as indicated, and reload it. Setup
The plotter now reads your marks and adjusts itself automatically.
Ready
7 When the Load Media light comes on again, remove the sheet and make sure that the plotter has marked your selections with a check mark. Three important points concerning the Color Cartridge Test Procedure: Always use the Color Cartridge Test Sheet immediately after printing it. Any plot that was in the plotter's memory before you printed the Color Cartridge Test Sheet has been lost and so, to print it, you must resend it.
510
6
To see the current configuration of the plotter 62 To change the serial interface settings 63 To change the graphics language setting for less common applications 63 To change the I/O timeout setting 64 To upgrade your plotter with more memory 64 To upgrade your plotter with a network interface 65 To upgrade the HP DesignJet 330 plotter with color 65
RECONFIG URATION
Reconfiguring your plotter
61
6
Reconfiguring the plotter To see the current configuration of the plotter
To see the current configuration of the plotter
To see the current configuration of your plotter, print the Setup Sheet, as explained from page 119. Those items on the Setup Sheet which you may change are listed on page 122, together with their defaults. [. . . ] margin The space around the page added by the plotter to separate one page from another and to avoid printing right to the edge of the media. media deflector The metal part situated between the optional E/A0-size legs, to stop the largest media sizes touching the floor. A set of logical pens defined by color and RTL One of Hewlett-Packard's standard graphics languages for plotters and printers. ROM SIMM A physical module containing read-only data, that can be installed in the back of the plotter to provide upgrades. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP DESIGNJET 350C PRINTER
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP DESIGNJET 350C PRINTER will begin.