User manual HUSQVARNA LZ SERIES ZTR
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA LZ SERIES ZTR. We hope that this HUSQVARNA LZ SERIES ZTR user guide will be useful to you.
Manual abstract: user guide HUSQVARNA LZ SERIES ZTR
Detailed instructions for use are in the User's Guide.
[. . . ] Operator Manual
LZ5227 / LZ7230 / LZ30 / LZ6130C / 968999674 968999676 968999776 968999752 LZ6130 / LZ6127 / LZ30C / LZ7230C / 968999675 968999709 968999751 968999753
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
English
©2007 HTC. Printed in U. S. A.
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To turn to the right While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction. To turn to the left While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction. To zero turn While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically. Then by alternating one lever slightly to the forward position and the other in the reverse position.
Training
Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entirety prior to attempting to move the mower under its own power. Additionally, we suggest when first operating the mower, use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during initial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to Zero Turn mowers to become familiar with the mower’s movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to overly aggressive maneuvers.
Steering
To move forward and backward The direction and speed of the mower’s movements is effected by the movement of the control lever(s) on each side of mower. The right control lever controls the right wheel.
IMPORTANT INFORMATION When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.
First time users should push mower (see “Moving by Hand” in the “Operation” section) to an open, flat area, without other people or vehicles/obstacles nearby. In order to move unit under its own power, the operator must be in the seat, start engine (see “Before Starting” in “Operation” section), adjust engine speed to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. As long as the control levers have not been moved forward or backwards, mower will not move. Pull back on control levers to the neutral position and mower should
English-26
OPERATION
Roll bar and safety belt
Operate the unit with the roll bar in the raised and locked position and use the seat belt. The seat belt must be used when the roll bar is in upright position.
8011-464
Roll bar in upright position
Before Starting
• Read the sections “Safety Instructions” and “Controls” before starting the machine. • Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). The following conditions must be fulfilled before the engine can be started: • The driver must be seated on the seat. • The blade switch for engaging the mower blades must be depressed. • Both steering controls must be in the locked (outer) neutral position.
8011-527
Start conditions
Starting the Engine
1. Raise the mower deck by pulling the lifting lever backward to the locked position (transport position). Activate the parking brake.
8011-753
Raise the mower deck
English-27
OPERATION
4. Disengage the mower blades by depressing the blade switch.
8011-510
Depress the control for disengaging the mower deck
5. Move the steering controls outward to the locked (outer) neutral position.
8011-526
Steering controls in the outward, locked neutral position
6. [. . . ] 90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein. Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months. Rental Warranty: 90 days on all applicable professional equipment reference warranty time period charts located in the back of the Retailer Warranty Policy & Procedure Manual. Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in material and workmanship. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA LZ SERIES ZTR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA LZ SERIES ZTR will begin.