User manual KOMPERNASS KH 3222 UNIVERSAL-BENCH VICE

[. . . ] ⷠIt makes working comfortable as the swivel head can be fixed in almost any position. [. . . ] ⷠPlace round parts vertical or horizontal to the V nut and clamp them tightly. ⷠCheck the clamping screw regularly to ensure that it is fixed well into the groove and retighten it if required. ⷠThe vice is made of aluminium spray cast and therefore is only conditionally impact resistant. Do not use heavy hammers for bending, aligning or tapping objects flat. ⷠDo not use extension pipes for clamping, as it involves the danger of overloading the jack screw (Danger of breaking). Clamping jaw with V nuts » Hexagon socket head screw ¿ Swivel head ´ Clamping bolt swivel head ² Clamping screw ¶ Hexagon socket head screw º Clamping bolt ¾ Jack screw µ Hexagonal wrench ¸ Tool attachment Fix the vice on an appropriate surface by means of a clamping screw ². Long parts can also be clamped vertically in order to be able to process the front end, if the vice is fixed directly in front of the edge of the bench. ⷠTurn the vice in the desired position and fix the swivel head ¿ with the clamping bolt ´. [. . . ] ⷠPlace the tool attachment ¸ on the swivel head ¿ and fix it with the hexagon socket head screw ». [. . . ]