Detailed instructions for use are in the User's Guide.
[. . . ] bizhub C20P User's Guide
A00F-9564-00A
Thank You
Thank you for purchasing a bizhub C20P. Your bizhub C20P is specially designed for optimal performance in Windows, Macintosh and Linux environments.
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered trademarks of KONICA MINOLTA HOLDINGS, INC. bizhub and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
All other trademarks and registered trademarks are the property of their respective owners.
Copyright Notice
Copyright © 2008 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. , Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. This document may not be copied, in whole or part, nor transferred to any other media or language, without written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Notice
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. [. . . ] Settings
LABEL
-8-7
When printing on LABEL using manual duplex pass, correct the secondary image transfer current.
GLOSSY Settings -8-7 1 When printing on GLOSSY 1
using manual duplex pass, correct the secondary image transfer current.
92
Configuration Menu Overview
GLOSSY Settings -8-7 2 When printing on GLOSSY 2
using manual duplex pass, correct the secondary image transfer current.
IMG ADJ THICK
CYAN
Settings
-5-0-5
When printing on thick paper, adjust the cyan in the image.
MAGENTA Settings
-5-0-5
When printing on thick paper, adjust the magenta in the image.
YELLOW Settings
-5-0-5
When printing on thick paper, adjust the yellow in the image.
BLACK
Settings
-5-0-5
When printing on thick paper, adjust the black in the image.
IMG ADJ BLACK SUPPLIES REPLACE
Settings
-2-0-2
When printing in grayscale, adjust the black in the image.
TRANS. Settings YES/NO BELT Reset the service life counter for the
transfer belt unit.
TRANS. Settings YES/NO ROLLER Reset the service life counter for the
transfer roller.
FUSER UNIT
Settings
YES/NO
Reset the service life counter for the fuser unit.
Configuration Menu Overview
93
QUICK SETTING
UPDATE SETTING
Setup
EXECUTE / CANCEL
Select whether or not to update the printer settings from the definitions file on the USB memory device. If CANCEL is selected, the settings are not updated.
BACKUP SETTING
Backup
EXECUTE / CANCEL
Select whether or not to save the printer settings information on a USB memory device. If EXECUTE is selected, the printer settings are saved on a USB memory device. If CANCEL is selected, the settings are not saved.
SERVICE MENU
With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be used by the user.
94
Configuration Menu Overview
Camera Direct
Camera Direct
If a digital camera with PictBridge (1. 0 or later) is connected to the printer through the Camera Direct Print port, images stored on the digital camera can be printed directly from the printer. For details on using the digital camera, refer to your digital cameras manual. - DPOF AUTOPRINT image print - Cropping print - Borderless - Print quality (printer setup) - Paper type (printer setup) - DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
From the printer's Camera Direct Menu, specify settings for Paper Source, Layout, Paper Margin and Image Quality. The Media Type setting that is used is the default printer setting that is selected. If these settings can be specified from the digital camera, they do not need to be specified from the control panel. These settings are overridden by settings configured within the digital camera. For details on control panel settings, refer to "CAMERA DIRECT" on page 65. Connect the USB cable to the digital camera and to the KONICA MINOLTA Digital Camera Direct Print Port. A USB cable is not included with the printer and must be purchased separately, if not supplied with your digital camera. From the digital camera, specify the image that you wish to print and the desired number of copies. Start printing from the digital camera.
2
3 4
96
Camera Direct
Memory Direct
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the printer. Memory direct can be used only if the optional hard disk kit or a CompactFlash card is installed. In order to perform collated printing with memory direct, the optional hard disk kit or a CompactFlash card of 1 GB or more must be installed. For details on specifying settings with the control panel, refer to "MEMORY DIRECT" on page 62.
Printing From a Connected USB Memory Device
1
Plug the USB memory device into the KONICA MINOLTA Digital Camera Direct Print Port. The USB icon appears in the upper-right corner of the message window, and the Memory Direct menu appears.
2 3
Select LIST OF FILES, and then press the Menu/Select key. When all files (PDF, XPS, JPEG and TIFF) are displayed, select Type OF FILES, and then press the Menu/Select key. [. . . ] Print a configuration page (PRINT MENU/CONFIGURATION PG) and verify that the total amount of the RAM installed in your printer is listed.
222
Dual In-Line Memory Module (DIMM)
Hard Disk Kit
If you install a hard disk kit, the followings can be performed:
Collate printing Job printing/saving Fonts/forms download User Authentication/Account Track Direct printing A hard disk kit and a CF adapter cannot be installed simultaneously.
Installing the Hard Disk kit
Note
It's very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on page 219. In addition, always handle circuit boards by the edges only.
1
Turn off the printer and disconnect the power cord and interface cables.
Hard Disk Kit
223
2
Using a screwdriver, remove the screw. Then, slide the rear cover to the right and remove it.
3
Using a screwdriver, loosen the seven screws. [. . . ]