Detailed instructions for use are in the User's Guide.
[. . . ] This declaration is valid for the area of the European Union (EU) only. Product Type Product Name Options Standards Copying Machine EP4000/EP5325 AF-5, AFR-13, S-106, ST-104, S-208, ST-211, C-301, PF-5D, PF-205, PF-105, AD-9, D-102, DT-103, E2000Kit Safety*2 : EN 60 950 / 1992 (A1 : 1993, A2 : 1993, A3 : 1995) (Safety of information technology equipment, including electrical business equipment) EMC*1 : EN 55 022 (Class B) / 1995 (Limits and method for measurement of radio disturbance characteristics of information technology equipment (ITE)) EN 50 082-1 / 1992 (Electromagnetic compatibility - Generic immunity standard Part1: Residential, commercial and light industry) IEC 801-2 / 1991 (Electrostatic discharge requirement) IEC 801-3 / 1984 (Radiated electromagnetic field requirement) IEC 801-4 / 1988 (Electrical fast transient / burst requirement) : *1) EMC performance : This product was designed for operation in a typical office environment. *2) First year of labeling according to EC-directive 73/23/EEC and 93/68/EEC :97 : 73 / 23 / EEC and 93 / 68 / EEC : 89 / 336 / EEC and 93 / 68 / EEC
Notes
EC Directives
Safety EMC
ii
Contents
Terms and Symbols for the Type of Originals and Copy Paper vi
Chapter 1 Safety Notes
1. 3
Operating Environment Using the Copier Properly Moving the Copier Care of Copier Supplies
Chapter 2 Getting to Know Your Copier
p. [. . . ] The copy cycle is run for page insertion.
Making Copies
\
the originals loaded in it to detect the place for inserts. (At this time, no copy cycle is run. )
Chapter 3
Example 1: To place a copied insert at the 2nd position from top.
10
Press the Start Key to let the copier start the original count sequence.
66
7. Auxiliary Functions
Using Page Insertion
<10-Key Input>
1
Touch Page Insertion .
5
Select the paper source in which paper for inserts has been loaded in step 3.
1149O344CB
1156O079DB
Chapter 3
2
Touch the appropriate key for Copy Onto Inserts to select whether to copy onto inserts (YES) or not (NO).
6 7
Touch Enter .
Touch 10-Key Input .
Making Copies
1149O336DA
1149O342DA
3
Load the paper for inserts into the drawer.
8
Enter the number of originals from the 10-Key Pad.
12
1149O093AA
1 4 7
2 5 8
3 6 9
1149O045AA
Useful Tip You can use the Multi Bypass Tray as the source of the paper for the inserts.
NOTES · The maximum number of originals that can be entered is 60. · Press the Clear key to correct a number entry.
4
Touch the paper size key for Insert Paper.
9
Touch or to move the cursor to position no. Auxiliary Functions
10
From the 10-Key Pad, enter a number for placement position no. 1.
12 13
Touch Enter .
Load the original set into the document feeder.
1149O344CB
Example 1: To place a copied insert at the 2nd position from top, enter 2 for position no. 1.
Original Set Copy Set
1145O339DA
14
\
Copied Insert
Press the Start Key. The copy cycle is run for page insertion.
1149O046AA
Example 2: To place a non-copied insert between pages 1 and 2, enter 2 for position no. 1.
Copy Set Original Set Non-Copied Insert
\
1149O047AA
NOTES
· To correct a number entry, press the
Clear Key and then enter the new number. If you want to place more inserts, repeat steps 9 and 10 to enter numbers for placement positions no. NOTE There are from 1 to 20 positions for inserts.
11
Making Copies
Chapter 3
68
7. Auxiliary Functions
OHP Interleaving
When you make copies on transparencies, the OHP Interleaving function inserts copied or non-copied interleaves after each transparency. Select the appropriate one according to your need.
Functions
Single Copy <Copied Interleaves> Originals
Chapter 3
Copies
The copier copies onto OHP transparencies and, after each transparency, inserts a copied sheet of paper.
1122
12
<Non-Copied Interleaves> Originals any paper source.
Copied Interleaves
Making Copies
1149O063AA
Copies
The copier copies onto OHP transparencies and, after each transparency, inserts a non-copied sheet of paper.
1
· OHP Interleaving can be available only when A4 lengthwise or A4 crosswise paper is loaded in · For Multiple Copy, the copier should be equipped with a 20-Bin Sorter or 20-Bin Staple Sorter. Job Memory Input and Job Recall
Job Memory Input
Up to 10 different, frequently used copying job programs can be stored in memory and recalled later as necessary. If "100 Accounts" or "1000 Accounts" is selected for "Copy Track" of Administrator Mode under User's Choice, five more jobs can be stored in memory for each account (only for account #1 to #10), in addition to the ordinary jobs.
Storing a Job
4
1 2
Chapter 4
Set up the job you want to store in memory.
Select any one of the 10 job number keys from 1 to 10 . (For Account Job, select any number from 1 to 5 . ) Touch a job number key marked with .
Press the User Mode key.
User Mode
1134P356CA
3
Touch Job Memory Input .
1149O358CA
Using the User Mode
NOTE A job number key not marked with indicates that a job has already been stored under that number, rejecting the input of a new job. If you want to use that number to store a new job, first delete the job which is now stored in that number. 80
1156O088DA
Touch Account Job if you want to store a job in Account Job memory.
5
To check for the details of the job stored, touch Check and then touch the job number key.
1149O359CA
79
1. Job Memory Input and Job Recall The job settings appear on the Touch Panel.
1149O360CA
6
After you have checked the settings, touch Exit .
7
Touch Exit on the Job Memory Input screen. Then, the Basic screen reappears.
1149O359CA
Using the User Mode
Chapter 4
80
1. Job Memory Input and Job Recall
Deleting a Program
1
Press the User Mode key.
4
Touch Exit . Then, the Basic screen reappears.
User Mode
1134P356CA
2
Touch Job Memory Input .
1149O362CA
Chapter 4
1156O088DA
Touch Account Job if you want to delete a job in Account Job memory.
Using the User Mode
3
Touch Delete , then touch the job number key from which you want to delete a job program. The number key you touch should not be marked with .
1149O361CA
When appears in that key, it indicates that the job program has been deleted.
81
1. Job Memory Input and Job Recall
Recalling a Job from Memory
1
Press the Job Recall key.
Job Recall
1134P365CA
2
Touch the number key in which the desired job has been stored.
1149O363CA
3
Check the settings made and then touch Exit . [. . . ] of Bins Modes Kinds of Paper Non-Sort Bin + 20 Sort Bins Non-Sort Mode, Sort Mode, Group Mode, Sort-Staple Mode, Hole Punch Mode Non-Sort Mode, Hole Punch Mode · Plain paper, Recycled paper · Special Paper T Thick paper, Transparencies, Translucent paper Sort Mode, Group Mode, Sort-Staple Mode · Plain paper, Recycled paper Non-Sort Mode : A3L to A6L Sort Mode, Group Mode : A3L to A5L Sort-Staple Mode : A3L to B5L Hole Punch Mode : A3L, A4C Non-Sort Mode, Hole Punch Mode · Plain paper, Recycled paper Non-Sort bin: 100 sheets 1st bin to 20th bin: 50 sheets/bin Total: 1, 100 sheets (A4 or smaller, weighing 80g/m 2) Total: 600 sheets (A3 or B4, weighing 80g/m2) · Special Paper Transparencies: 10 sheets (Max. paper size Letter) Thick paper, Translucent paper: 10 sheets Sort Mode, Group Mode, Sort-Staple Mode · Plain paper, Recycled paper 1st bin to 20th bin: 50 sheets/bin Total: 1, 000 sheets (A4 or smaller, weighing 80g/m 2) Total: 600 sheets (A3 or B4, weighing 80g/m2) Punch Hole: 4 Hole DC24V supplied from copier 72W or less Width : 425mm Depth : 605mm Height : 960mm 44. 5kg Staple Cartridge, 5, 000 staples / cartridge 1 piece
Paper Size
Capacity of Bins
Punching Power Source Power Consumption Dimensions Weight Accessories
Miscellaneous
Chapter 7
138
1. Specifications Paper Feed Cabinet PF-205
Kinds of Paper Copy Paper Size Paper Feeding System Power Source Dimensions Weight Plain paper, Recycled paper : Weighing 60g/m 2 to 90g/m 2 3rd Drawer : A5L to A3L 4th Drawer : A4L to A3L Automatic feeding from drawer Total Drawer Capacity : 1, 000 sheets (500 sheets 2) DC24V supplied from copier Width : 620mm Depth : 695mm Height : 35kg
390mm
Paper Feed Cabinet PF-105
Kinds of Paper Copy Paper Size Paper Feeding System Power Source Dimensions Weight Plain paper, Recycled paper : Weighing 60g/m 2 to 90g/m 2 3rd Drawer : A4C Automatic feeding from drawer Drawer Capacity : 2, 500 sheets (80g/m 2) DC24V supplied from copier Width : 620mm Depth : 695mm Height : 36. 4kg
390mm
Paper Feed Cabinet PF-5D
Kinds of Paper Copy Paper Size Multiple Copies Power Source Dimensions Weight Plain paper, Recycled paper : Weighing 60g/m 2 to 90g/m 2 A5L to A3L 2-Sided Copies : 50 sheets DC24V supplied from copier Width : 620mm Depth : 695mm Height : 42kg
390mm
Duplex Unit AD-9
Chapter 7 Kinds of paper Capacity Power Source Weight Dimensions Plain paper, Recycled paper : Weighing 60g/m 2 to 90g/m 2 Size : A3L to A5L Up to 50 sheets (60g/m2 to 90g/m2 ) Up to 20 sheets (91g/m2 to 157g/m 2) DC24V supplied from copier 14. 2kg Stored in the Paper Feed Cabinet
Miscellaneous
139
1. Specifications Large Capacity Cassette C-301
Type Installation Types of Paper Paper Size Capacity Power Source Power Consumption Dimensions Automatic paper supply and take-up from a 3, 000-sheet capacity Cassette Fixed to copier by means of dedicated Stand with Slide Rails Plain paper, Recycled paper: Weighing 60g/m2 to 90g/m 2 A4C 3, 000 sheets (80g/m2) DC24 V, 1. 2 A (supplied from copier) 30 W or less Width : 290mm Depth : 446mm Height : 480mm 10kg (Excluding Mounting Brackets)
Weight
Data Controller D-102
Name Type Type of Cards Departmental Cards Accommodated Display Copy Count to be Stored in Memory Data Controller D-102 Magnetically encoded card accessed Copy Counter Departmental, Register, Administration, Erasing, Time/Date, and Cleaning Card Up to 999 groups 7-segment, 16-digit liquid-crystal display · Max. [. . . ]