User manual KRUPS XN6008

[. . . ] First Use (or after a long period of non-use)/Première utilisation (ou après une longue période de non-utilisation) 14 Settings mode: Emptying the System before a period of non-use or for frost protection/ Nespresso is an exclusive system creating the ultimate Espresso, time after time. All Nespresso machines are equipped with a unique extraction system that guarantees up to 19 bar pressure. Each parameter has been calculated with great precision to ensure that all the aromas from each capsule can be extracted, to give the coffee body and create an exceptionally thick and smooth crema. CAUTION: when you see this sign, please refer to the safety precautions to avoid possible harm and damage. [. . . ] Place the water tank on its Base ensuring it is properly clipped and place the drip tray and the capsule container in position. Turn the machine ON by pressing the Brewing button, moving the dials or by opening the slider.  To connect your machine, please follow the instructions in sections "Get the App" and "Pairing" on page 13. Multiple devices can be connected to your Nespresso Expert machine only if using a unique Club Members number. To pair these additional devices, please follow the instructions in the Before making any coffee, make sure to rinse your machine by: Close the slider, select the Lungo icon and press the brewing button. If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. Turn the machine OFF by turning the temperature dial anti clockwise until it reaches 0 temperature. During heat up, you can select any coffee preparations and press the brewing button. Recipe glass, slide the cup support across the metalic base of the machine. To ensure hygienic conditions, it is highly recommended to change the water after a long period of non-use and to not reuse a used capsule. The highest temperature setting is very hot, we recommend to use a cup with a handle. ristretto (25 ml) Espresso (40 ml) Lungo (110 ml) Americano (25 ml coffee; 125 ml hot water) Hot water (200 ml) To select your recipe, turn the beverage dial until the desired beverage. To stop the coffee flow, press the brewing Button or slightly move the slider towards the right of the machine. To manually top up your beverage, press the brewing button within 10 seconds from the end of preparation. For water top-up you may add manually by selecting the water icon on the beverage button. To change the selected cup size during brewing select the new desired coffee button. the machine Will immediately stop if the coffee volume extracted is larger than new desired coffee size. Any coffee button can be programmed: Ristretto: from 15 to 30 ml Espresso: from 30 to 70 ml Lungo: from 70 to 130 ml Americano: coffee from 15 to 110 ml, hot water from 25 to 300 ml Hot water from 50 to 300 ml Open the slider and insert the capsule. Select Americano recipe and press and hold brewing button until desired coffee volume is reached. Press and hold again and keep pressed until desired water volume is reached. Never immerse the appliance or part of it in water or any other liquid. [. . . ] - Check if the water tank is correctly positioned, if empty, fill with fresh drinking water. The slider does not close completely or the - E mpty the capsule container. Then plug again - When maintenance light blinks every 4 seconds, descaling is required. - Please wait for all buttons to switch off, this will take a few minutes. [. . . ]