User manual LANIER IS760D
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LANIER IS760D. We hope that this LANIER IS760D user guide will be useful to you.
Manual abstract: user guide LANIER IS760D
Detailed instructions for use are in the User's Guide.
[. . . ] Quick Installation Guide
Please read the Safety Information in the Operating Instructions before using this machine. It contains important information related to USER SAFETY and PREVENTING MACHINE PROBLEMS.
Image Scanner
Confirming the Installation Environment
Checking the Contents of the Box
Check the contents of the box according to the following list. If one or some items are missing, please contact your sales or service representative.
Quick Installation Guide (this sheet) CD-ROM Power Cord Tool Cleaning Cloth Safety Instruction Sheet Two Caps
Installing the Scanner
Remove the tape.
Installing the TWAIN/ISIS Driver
Preparation
Log on to the computer as a member of the Administrators group, for installation to Windows 2000/XP, Windows Server 2003, or Windows NT 4. 0. A TWAIN driver and its applications (DeskTopBinder Lite, etc) are to be installed for the TWAIN scanner, and an ISIS driver and its applications (QuickScan, etc), are to be installed for the ISIS scanner.
The scanner location should be carefully chosen because environmental conditions greatly affect its performance.
Power Connection
Connect the power cord to a power source with the following specifications: Product Specifications
North America G417-17/G418-17 power supply rating: AC 120V, 60Hz, 2A G418-27 power supply rating: AC 220-240V, 50/60Hz, 1A
CAUTION
· This scanner weighs approximately 33 kg. [. . . ] Interfaces are switched automatically when you change from one of the computer to the other.
2
A Open the cover of the switch box on the lower left of the frontside of the
scanner.
ADC015S
Note Push the knob of the cover to the left and pull the cover to open.
B Confirm the DIP Switch No. 2 is in the ON position.
ADC080S
Note If the DIP Switch No. 2 is set to OFF, set it to ON. If the switch is set to OFF, "Found New Hardware Wizard" will not start. .
Press the Hard Reset Switch if you changed the DIP Switch while the power is ON. p. 34 "Using the Hard Reset Switch"
28
Connecting to the Computer
C Connect the USB cable to the USB connector.
2
ADC022S
D Connect the other side of the cable to the USB connector on your computer.
Connecting with IEEE1394 Interface
Note The optional IEEE1394 interface board is required.
An IEEE1394 cable is packed to be used for the optional IEEE1394 interface board. An irregular operation might occur for the IEEE1394 interface board of some PC. One with a SCSI interface, and two with the optional IEEE1394 interface. Though, you cannot use the scanner at the same time from three computers. Interfaces are switched automatically when you use any one of the computers.
A Open the cover of the switch box on the lower left of the frontside of the
scanner.
ADC015S
Note Push the knob of the cover to the left and pull the cover to open.
29
Setting up the Scanner
B Confirm the DIP Switch No. 2 is in the ON position.
2
ADC080S
Note If the DIP Switch No. 2 is set to OFF, set it to ON. If the switch is set to OFF, "Found New Hardware Wizard" will not start. .
Press the Hard Reset Switch if you changed the DIP Switch while the power is ON. p. 34 "Using the Hard Reset Switch"
C Connect the IEEE1394 cable to the IEEE1394 connector.
ADC023S
Note Connect the cable to either one of the connectors.
D Connect the other side of the cable to the IEEE1394 connector on your computer.
E Repeat Steps C and D with the other IEEE1394 connector to connect with a
second computer.
30
Connecting to a Power Source
Connecting to a Power Source
This section explains how to connect this machine to a power source, using a bundled AC power cord.
R WARNING:
· Do not use with a power source with a voltage different from the specified voltage. Placing heavy objects on the cord, pulling on or bending it excessively can damage the Power Cord, creating the risk of fire or electric shock. This can create the risk of electric shock.
2
R CAUTION:
· When unplugging from an outlet, be sure to grasp the plug when pulling. This could damage the cord creating the risk of fire or electrical shock.
A Confirm that the power switch is set to Off.
ADC124S
B Confirm the lock screws on the back of this machine are removed and the
holes left by the removed screws are covered with the caps.
ADC088S
31
Setting up the Scanner
Important Be sure to remove the lock screws. Turning the power on without removing the screws could result not only in failure in scanning but in malfunction of this machine.
C Confirm that the lock lever located on the back of the machine is set to the
"Unlock" position.
2
ADC025S
Important Be sure to set the lock lever to "Unlock". Turning on the power with the lock lever set to "Lock" could result in failure in scanning or in malfunction of this machine.
D Push the power cord plug all the way into the power connector on this machine.
ADC026S
Note Be sure to use the power cord that comes with this machine.
E Insert the power plug into the power outlet.
32
Turning the Power On/Off
Turning the Power On/Off
Important Do not turn the power of the scanner ON before the software installation. If you run the "Found New Hardware Wizard" beforehand, you will not be able to install the software correctly. When the "Found New Hardware Wizard" started before the installation, click the [Cancel] button to discontinue the wizard.
2
ADC101S
1. Power On
Turning the Power On when Connected with SCSI Interface
Turn the power on from the farthest devices from the computer on the daisy chain. Start the computer last.
Note The scanner will not be detected if you start the computer first.
Turning the Power On when Connected with USB/IEEE1394 Interface
There is no order to turn on the power when you connect the scanner with USB or IEEE1394 interface. You can turn on either the scanner or the computer first.
Turning the Power Off
There is no order to turn off the power. You can turn off either the scanner or the computer first.
33
Setting up the Scanner
Using the Hard Reset Switch
You need to hard reset the scanner when validate the settings of the DIP Switches or the Rotary Switch. [. . . ] Even when a data size is shown in a cell, it may happen that you cannot perform a scanning operation with the relevant settings due to the limitation of the TWAIN-compliant application you use for scanning. For information about the maximum data size that the application can handle, see the manual that comes with the application.
6
When [Binary(Text)], [Binary(Photo)], [Binary(Auto Image)], or [Binary(Text/Photo)] is Selected
Scan Area A3 B4 A4 B5 A5 B6 A6 11" × 17" 81"/2 × 14" 81/2" × 13" 81/2" × 11" 51/2" × 81/2" 100dpi 200dpi 300dpi 400dpi 500dpi 600dpi 700dpi 800dpi 235 176 117 87 58 43 29 227 144 134 113 56 943 705 470 353 234 174 117 913 579 538 455 227 2, 121 1, 591 1, 061 794 528 394 264 2, 051 1, 304 1, 211 1, 024 512 3, 772 2, 826 1, 886 1, 414 939 702 468 3, 652 2, 324 2, 158 1, 826 913 2, 946 2, 208 1, 469 1, 098 734 3, 629 3, 370 2, 852 1, 423 4, 247 3, 183 2, 116 1, 582 1, 058 2, 051 2, 876 2, 155 1, 437 2, 794 3, 759 2, 815 1, 880 3, 652
Values: Data size in KB
82
How Data Size Changes Depending on Scan Area and Resolution
When [Gray Scale] or [256 Colors] is Selected
Scan Area A3 B4 A4 B5 A5 B6 A6 11" × 17" 81/2" × 14" 81"/2 × 13" 81/2" × 11" 51/2" × 81/2" 100dpi 200dpi 300dpi 400dpi 500dpi 600dpi 700dpi 800dpi 1, 888 1, 416 944 708 470 352 235 1, 826 1, 162 1, 079 913 456 7, 552 5, 664 3, 776 2, 832 1, 881 1, 410 940 7, 304 4, 648 4, 316 3, 652 1, 826 16, 993 12, 744 8, 496 6, 372 4, 234 3, 173 2, 117 16, 435 10, 458 9, 711 8, 217 4, 108 30, 210 22, 656 15, 105 11, 328 7, 527 5, 642 3, 763 29, 218 18, 593 17, 265 14, 609 7, 304 23, 601 17, 700 11, 761 8, 815 5, 880 29, 052 26, 977 22, 827 11, 413 33, 986 25, 488 16, 936 12, 694 8, 468 16, 435 23, 052 17, 278 11, 526 22, 370 30, 108 22, 568 15, 054 29, 218
Values: Data size in KB
6
When [8 Colors] or [8 Colors(Photo)] is Selected
Scan Area A3 B4 A4 B5 A5 B6 A6 11" × 17" 81/2" × 14" 81/2" × 13" 81/2" × 11" 51/2" × 81/2" 100dpi 200dpi 300dpi 400dpi 500dpi 600dpi 700dpi 800dpi 707 529 352 263 174 130 87 682 434 403 341 169 2, 829 2, 116 1, 411 1, 061 702 524 351 2, 739 1, 739 1, 614 1, 366 682 6, 365 4, 773 3, 185 2, 383 1, 584 1, 183 793 6, 155 3, 912 3, 633 3, 074 1, 538 11, 316 8, 480 5, 659 4, 244 2, 819 2, 107 1, 406 10, 957 6, 972 6, 474 5, 478 2, 739 8, 838 6, 625 4, 408 3, 295 2, 202 10, 889 10, 111 8, 556 4, 270 12, 743 9, 550 6, 350 4, 748 3, 175 6, 155 8, 630 6, 465 4, 313 8, 384 11, 277 8, 447 5, 640 10, 957
Values: Data size in KB
83
Appendix
When [16770K colors] is Selected
Scan Area A3 B4 A4 B5 A5 B6 A6 11" × 17" 81/2" × 14" 81/2" × 13" 81/2" × 11" 100dpi 200dpi 300dpi 400dpi 500dpi 5, 663 4, 247 2, 831 2, 123 1, 411 1, 057 705 5, 478 3, 486 3, 237 2, 739 1, 369 22, 655 16, 989 11, 327 8, 495 5, 645 4, 230 2, 822 21, 914 13, 945 12, 949 10, 957 5, 478 50, 977 38, 231 25, 486 19, 113 12, 701 9, 519 6, 350 49, 306 31, 376 29, 135 24, 653 12, 326 90, 628 67, 964 45, 314 33, 982 22, 581 16, 925 11, 289 87, 656 55, 781 51, 796 43, 828 21, 914 70, 802 53, 100 35, 283 26, 446 17, 639 87, 158 80, 932 68, 481 34, 240 600dpi 101, 954 76, 460 50, 807 38, 079 25, 401 49, 306 700dpi 800dpi 69, 154 51, 832 34, 577 67, 111 90, 324 67, 701 45, 162 87, 656
6
51/2" × 81/2"
Values: Data size in KB
84
Options
Options
In this section, we refer to the options for this machine.
Image Processing Unit Type B
Installation of this option enables the following visual image processing by use of the TWAIN driver.
Binary(Auto Image) When you binary-scan an original mainly with text files, this machine automatically detects and scans an appropriate threshold value. Binary(Text/Photo) Set when you scan an original consisting of both texts and photos. It scans with binary, and automatically detects and scans the photos to represent a para-intermediate tone (gray) with a black and white net-dot pattern. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LANIER IS760D
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LANIER IS760D will begin.