User manual ROSE DISPLAYS ECONOSTAND WITH ANOQUICK

[. . . ] EconoStandTM Instruction Sheet Parts EconoStand components Base Plate Top Thumb Screw Pole End Caps 06-5525 AnoQuick 12A300 Bottom Holder Bracket Top Holder Bracket Instructions For Assembly Step 1 Assemble bottom holder bracket onto lower pole section (this is the thicker section of the pole). 1 2 2a Step 2 Screw pole onto baseplate. [. . . ] Install endcaps after assembly to brackets. Step 6 Adjust height of stand as necessary. The AnoQuickTM and EconostandTM are trademarks of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part#02INSEcono/AnoQuick Revised-9. 10. 02 35 Congress Street, Salem MA 01970 Tel# 1-800-631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays. com EconoStandTM Instruction Sheet Parts EconoStand components Base Plate Top Thumb Screw Pole End Caps 06-5525 AnoQuick 12A300 Bottom Holder Bracket Top Holder Bracket Instructions For Assembly Step 1 Assemble bottom holder bracket onto lower pole section (this is the thicker section of the pole). 1 2 2a Step 2 Screw pole onto baseplate. Using thumbscrew at top of pole, attach top holder bracket onto pole top. 3 4 Step 4 Prepare edges of graphic. Using the AnoQuick Holder run it across the graphic edge, crushing it slightly. 4 Push the holder on the graphic. 5 6 Step 5 Slide AnoQuick Holder onto brackets. [. . . ] Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. [. . . ]