User manual RUSSOUND R10DT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND R10DT. We hope that this RUSSOUND R10DT user guide will be useful to you.
![]() |
Manual abstract: user guide RUSSOUND R10DT
Detailed instructions for use are in the User's Guide.
[. . . ] Care From time to time you should wipe off the front and side panels and the cabinet with a soft cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering. Lightning For added protection for the subwoofer during a lightning storm, or when left unattended and unused for a long period of time, unplug it from the wall outlet. This will prevent damage to the subwoofer due to a lightning strike and power-line surges. [. . . ] 12. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through the openings.
2
R10DT SUBWOOFER
INTRODUCTION
The Russound R10DT active subwoofer delivers the chest-thumping deep bass sound you want for a supersonic listening experience. Whether it's the asteroids breaking apart in your favorite sci-fi movie or the in-yourface concert experience of a classic rock band performance, the R10DT keeps up its end of the deal in your home theater or audio system. With its built-in amplifier, the R10DT fits into to any system, and is tuned for both stereo music audio and for a home theater surround setup. The R10DT filters out mid- and high-range frequencies by sending bass-only signals to its own amplifier via an active crossover network.
Port
Port
DUAL TUNED PORT DESIGN
The R10DT subwoofer ports are tuned to provide optimum bass reinforcement for systems designed primarily for home theater entertainment or for music listening. This tuning provides an increase in low frequency output which is more ideal for movies where explosions and other action sounds need greater impact. For music applications, one of the ports is blocked with the included plug. This tunes the enclosure for a flatter response with extended low frequency response. It will produce lower notes and do so more accurately.
Woofer
The front-firing 10-inch woofer has a 38mm diameter voice coil and vented pole piece for high power handling and more efficient operation.
Subwoofer front (grille removed)
CONNECTIONS
When you make connections make sure the power switches of all components are off, including the subwoofer. Audio Cables If you are connecting your subwoofer into a system made up of separate components (preamps and power amps), you will need audio cables long enough to reach the subwoofer from the preamplifier and the power amplifier. Speaker Wire Typical speaker wire has a pair of separate conductors with insulating jackets that are molded together. We recommend that you use 16-gauge wire for connecting the receiver to the front speakers.
Polarity All speakers in a system must be connected with the same polarity. Speaker wire is marked for polarity so that you can identify which wire in the pair is which. Polarity is shown by a color strip on the insulation, by ridged molded into the insulation or be the colors of the wires, one copper and one silver. Strip the insulation from speaker wire ends to reveal the bare conductors before connecting to receiver, subwoofer or speaker terminals. Note: Always connect the red + terminal on the receiver to the red (+) terminal on the subwoofer, and the black () terminal on the receiver to the black () terminal on the subwoofer. The same is true for connecting the receiver outputs to the front speakers red (+) to red (+) and black () to black ().
3
R10DT SUBWOOFER
1
2
3
4
5
6
7
8
9
1
Volume Level Adjustment: Increase or decrease the output level relative to the incoming signal. Crossover: Provides active filtering of the incoming signal to allow only lower frequencies to be amplified. Power Auto, On and Off: Auto setting - amplifier turns on when audio is detected. Low-Level Line Input: Left and Right channel RCA connections for low-level audio signal feed. LFE Input: RCA connection for pre-filtered, low level signals from a processor such as home theater receiver
7
2
3
Speaker Level Input: (with passthrough) Springloaded terminals for up to 12 gauge speaker wire. Allows input connections to be sourced from an amplified speaker signal such as the Left and Right output from an amplifier/receiver. This amplified signal is tapped off for feeding the subwoofer but the signal is unaltered and is passed directly on to adjoining output terminals. [. . . ] Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to improper use voids the warranty. To return for repairs, the unit must be shipped to Russound at the owners expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND R10DT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND R10DT will begin.