User manual SEVERIN KA 4840

[. . . ] Risk of electric shock The device is powered by electricity, and so there is always a risk of electric shock. The following precautions are therefore to be taken: Every time the appliance is used, The main body including the power cord as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, or if excessive force has been used to pull the power cord, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. The appliance should only be connected to a socket installed in accordance with the regulations. [. . . ] Before making coffee for the first time, let the appliance go through two or three filtration cycles using the indicated maximum amount of cold water, but without using ground coffee. This should also be done if the appliance has not been used for an extended period of time, and after descaling. automatic switch-off To save energy, the appliance will switch off automatically 5 minutes after the brewing cycle is complete. The measuring scales on the water container help measuring the correct amount of clean water. Make sure that the indicated maximum amount of water or number of cups is not exceeded. If several consecutive brewing cycles are required, switch off the coffee maker after each cycle and let the appliance cool down for approx. Caution: When filling the appliance with fresh water shortly after a brewing cycle is completed, there is a danger of scalding from hot water or steam escaping through the water outlet. Aroma selection switch This appliance features a special aroma function, allowing the user to choose coffee with a normal strong flavour, or alternatively a very mild coffee. Turn the aroma selection switch to the desired setting before the brewing cycle is started: For mild coffee or For normal coffee The integrated power-cord storage compartment at the rear is used for storing the power cord. The recess at the bottom facilitates limiting the length of the power cord. Filling with water: Open the water container and fill it with the desired quantity of water, then close the lid. Preparing the carafe: Fit the drip-through lid so that the two triangular markings and are facing each other. If correctly inserted, the lid will disable the drip-stop mechanism in the filter holder during the brewing cycle. Inserting the paper filter: Open the swing-out filter and insert a size-4 paper filter into the filter holder, first folding down the perforated sides of the filter. Filling with ground coffee: For each regular-sized cup (125 ml), a measure of about 6 g (= 1½ - 2 teaspoons) of medium or finely ground coffee will be required. Selecting the coffee strength: Turn the aroma selection switch to the desired setting. Starting the brewing cycle: Use the button to switch the coffee maker on. Removing the carafe: Wait until all the water has passed through; the carafe can now be removed. To pour coffee, simply push down the lid-opening tab on the drip-through lid. Interrupting the brewing cycle: To interrupt the brewing cycle, use the button to turn the appliance off. Switching off the coffee maker: Remove the plug from the wall socket once brewing is complete. Heat-retaining carafe For technical reasons the lid does not close hermetically. [. . . ] Your local authority or retailer can provide information on the matter. Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. [. . . ]