User manual TP-LINK MA180

[. . . ] MA180 3. 75G HSUPA USB Adapter Rev: 2. 0. 0 1910010681 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] The following table lists the status information. 11 MA180 3. 75G HSUPA USB Adapter User Guide Status Information Indicates the network’s signal strength. Displays the name of your Internet service provider. Indicates that the current Internet status is disconnected. Indicates that the current Internet status is connected. Indicates that a new message is received (with visual prompt enabled) or there are unread messages. Indicates that the SIM/USIM card has not been inserted. Indicates that the SIM/USIM card has been inserted. Indicates that the PIN protection has been enabled. Indicates that the Adapter has not been connected to your computer. Indicates that the Adapter has been connected to your computer. 4. 2 Message , and you will see the Message interface as shown in Figure 4-1. Click on the icon 12 MA180 3. 75G HSUPA USB Adapter User Guide Figure 4-1    Inbox: Saves the received messages. Draftbox: Saves the unsent messages.  Note: The sent messages and the unsent messages can only be saved on PC. 4. 2. 1 Create and Send a Message To create and send a new message, follow the steps below: 1. above the message list to display the New Message interface as shown 13 MA180 3. 75G HSUPA USB Adapter User Guide Figure 4-2 2. There are two methods: 1) Enter the recipient’s number directly. 2) Click Send to… and then select a number in the Choose Number interface, as shown in Figure 4-3. Figure 4-3 3. After the edition, you can choose the following options:    Click Send to send the message. 14 MA180 3. 75G HSUPA USB Adapter User Guide  Note: You can also send mass messages following the above steps. 4. 2. 2 Search a Message To search a message, click on the icon message list area. Then the matched messages will be displayed in the 4. 2. 3 View a Message To view a message, follow the steps below: 1. The name and phone number of the message sender, message content and receiving time will be displayed below the message list. Please make use of the icons displayed above the message list for the following options: : Delete the selected message. You can press and hold the Ctrl or Shift and then click the selected messages. Then you can click on the icon delete the selected messages at the same time. You can forward only one message at a time. 4. 2. 4 Message Settings You can set visual and audio prompt as well as save mode for the received messages. Click on the icon , and then click the Message button to display the interface as shown in Figure 4-4. 15 MA180 3. 75G HSUPA USB Adapter User Guide Figure 4-4 4. 2. 4. 1 Alert Settings You can set visual and audio prompt for the received messages in the Text message handling area.  Show a notification when a new text message arrives With this item checked, when a new message arrives, a dialog box read “New message in!” will appear on the lower-right corner of your computer screen for about three seconds and then disappear. Meanwhile the icon will appear at the bottom of the utility interface. Click the words or go to the message interface to view the new message.  Play a sound when a new text message arrives With this item checked, the selected tone will be played when a new message arrives. Type the path and file name of the tone file into the “Sound file name” field or click the Browse button to locate a tone file. Click Test to play the tone; click Stop to stop playing the tone. 4. 2. 4. 2 Save Mode Settings You can specify a location to save the received messages in the New Message Save Mode area. When a new message arrives, it will be saved in the specified location. [. . . ] Click Delete and a dialog box will appear. 22 MA180 3. 75G HSUPA USB Adapter User Guide 3. Click Yes to delete the profile or click No to cancel the deletion.  Note: The default profile can be edited but can not be deleted. 4. 5. 1. 4 Set a Profile default To set a profile default, follow the steps below: 1. When a profile is set default, the word “Default” will appear in the brackets beside its name, as shown in Figure 4-10. [. . . ]