User manual XEROX DOCUPRINT 65 MICR GUIDE

[. . . ] Xerox DocuPrint Enterprise Printing Systems MICR User Guide DocuSP Version 3. 7 September 2003 701P22581 Xerox Corporation Global Knowledge and Language Services 701 South Aviation Boulevard, ESM1-058 El Segundo, CA 90245-4530 ©2003 by Xerox Corporation. Printed in the United States of America Publication number 701P22581 Xerox® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Copyright protection claimed includes all forms and matters of copyright table material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen displays looks, etc. Table of contents Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The text in the red circle indicates the location of the version information on the printed form. 2-12 MICR User Guide MICR fonts MICR User Guide 2-13 MICR fonts Selecting PostScript fonts To select a Xerox Postscript font, set the attributes for one of the following: · · · Internal name: E13B Point size: 9. 12 Internal name: E13B9 Point size: 9 Internal name: CMC72510 Point size: 9. 06 The Postscript E13B MICR font has the same character mappings as the PCL fixed pitch E13B font. Refer to the Generic MICR Fundamentals Guide for a complete listing of the character mappings. Selecting PCL fonts The following HP PCL escape sequences are used to select the Xerox PCL MICR fonts: · · E13B 300 and 600 dpi font: <ESC>(0U<ESC>(s0p8. 00h9. 00v0s0b0T CMC7 600 dpi font (DP 100/115/135/155/180 EPS only): <ESC>(1U<ESC>(s0p8h9. 1v0s0b0T Refer to the Generic MICR Fundamentals Guide for a complete listing of the fixed pitch E13B and CMC7 MICR font characteristics and character mappings. The character mappings relate the input character to the printed character. If both the 300 and 600 dpi E13B fonts have been loaded on the printer, the font is selected based on the PCL Unit that was specified. You can use the PCL Unit of Measure command to set the PCL Unit to 600 (for example, <ESC>&u600D). Alternatively, you can override the resolution to 600 dpi in the queue. Refer to "Setting the font resolution, " later in this chapter, for information on setting the resolution in the queue. 2-14 MICR User Guide MICR fonts Setting the font resolution Before printing MICR jobs, you must set the resolution attribute appropriately for the queue to which you will be sending the jobs. The following table lists the different MICR font formats and the resolution at which each font should be printed. Font name and format LCDS PS PCL LCDS PS PCL Required resolution E13B 300 DPI 300 DPI and 600 DPI 300 and 600 DPI CMC7 300 DPI 600 DPI 600 DPI If your document contains scalable fonts or simple line art generated at 600 dpi, the differences between printing at 300 or 600 dpi are subtle. However, if your document contains bitmaps with a resolution of 600 dpi, printing at 300 dpi causes a degradation of image quality. To preserve image quality, regenerate the bitmaps at 300 dpi. Setting the font resolution for the queue Before sending a document to a print queue, you must make sure that the resolution of the font used in the document is the same as that specified for the queue. If the font and queue resolutions do not match (for example, a document with a 600 dpi font is sent to a 300 dpi queue), the font may print with subtle distortions and could be rejected at the bank. Follow this procedure to set the font resolution as a queue property: 1. On the Queue Manager window, right-click the desired queue name, and select Properties from the pop-up menu. MICR User Guide 2-15 MICR fonts 3. From the Default Format menu on the Properties window, select the appropriate default format for the Print Description Language (PDL) used in your MICR jobs. 4. Select the tab for the desired PDL decomposer (PostScript/PDF, PCL, or LCDS). On the selected tab, select the resolution from the Resolution (dpi) menu. Notes: · When selecting the resolution for PCL, you must select the Override check box if the PCL job does not explicitly specify 600 dpi as the PCL Unit. 1200 by 600 dpi is not a valid resolution for the DP 100/115/135/155/180 EPS. Selecting this option may result in job errors. · 2-16 MICR User Guide MICR fonts 6. Click OK. Changing font resolution for a job You can change the font resolution for an individual job from the Job Manager window. On the Job Manager window, right-click the job you want to change, then select Properties from the popup menu. Click OK. MICR User Guide 2-17 MICR fonts Image quality for PCL The MICR fonts provided with the DocuPrint MX printers have been optimized for MICR printing on these systems. [. . . ] Thus, two persons can have custody of the printing facility, 4-2 MICR User Guide Additional information either by dual-key access to the physical media or by knowledge of a password to access the data files and run the print job. Software security There are a number of software features that provide different levels of protection, ranging from a class-level logon control to the ability to automatically delete certain files at the end of a print job. As with physical security, software security focuses on restricting access to key files for authorized individuals only. The following software features are provided for security on the DocuPrint MX printers. Logon levels Four user access levels are defined for the DocuSP software: · · · · Walkup User Trusted User Administrator Service Representative The Trusted User, Administrator, and Service Representative levels require a password. [. . . ]